Sony a5000/5100 video cage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Due to the lack of a available commercial version, here is my own video cage, tried with a sony a5100
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 580
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Due to the lack of a available commercial version, here is my own video cage, tried with a sony a5100, should also work with a sony a5000, but i'm unable to test it.
Arca Swiss compatible rail in the bottom, two accessory mounting points on the top and left side of the cage
The design was tested with petg and pla, with pla being a tad more rigid. Print the pieces flat in the bedplate and glue them together with a decent plastics glue.
Obviously any camera related accidents caused by this design are not my responsibility, be smart and don't trust a random piece of 3d printed plastic with your multi thousand dollar camera rig