60mm Spool Hub & Nut for Cardboard Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
60mm spool adapter (bolt/nut) for cardboard spools. Eliminates dust and provides smooth rotation.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After a long 13-hour print, I noticed a lot of cardboard dust from my filament spool rotating on the spool holder. The friction was slowly grinding down the cardboard edge. To solve this everyday annoyance, I designed this 60mm bolt and nut adapter.
It securely grips the inner hole of the cardboard spool, providing a smooth plastic surface for the spool holder to ride on. This completely eliminates wear and tear on the cardboard and keeps your printer area dust-free.
It was specifically tested on a Gembird spool (60mm inner diameter) but should fit any cardboard spool with similar dimensions.
Print Settings & Info:
Material: I recommend PLA or PETG. PLA provides great stiffness for the threads, while PETG offers lower friction for a smoother rotation.
Supports: None needed! Print it flat on the build plate.
Layer height: 0.20mm works perfectly.
Assembly: The threads have built-in tolerances, so the bolt and nut will screw together smoothly straight off the printer.