Front and Rear Shock Towers for FTX Banzai
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Requires some modification of the front and rear diff housing to make work.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
Smaller front and rear shock towers for the FTX Banzai (and other related chassis that use the same top diff. housing).
Requires removal of the top two screw hole area on the diff housings to allow for better body clearance. See pictures to see what is removed.
Requires 50mm shocks. Does not work with stock FTX Banzai shocks.
Created when I wanted to mount LMH-style bodies onto my Banzai chassis, where the body did not go low enough to allow that. Also requires 14-16mm long standoffs (brass ideally) to allow the front shocks to clear the front wishbones.
Rear shock tower has the locating holes for the body posts to mount to. Top one to screw into, bottom one to accept the locating peg. Screw goes in from the back of the vehicle towards the front of the vehicle.
Update 06/03/2026: Added strengthening section to rear shock tower.