1 / 5
HSW Mount for Kisrel UV Resin Kit (Dual 100g Bottles & Oval Light) — zdjęcie 1
1 / 5

HSW Mount for Kisrel UV Resin Kit (Dual 100g Bottles & Oval Light)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A sturdy Honeycomb Storage Wall (HSW) mount designed to hold two 100g Kisrel UV resin bottles and the accompanying oval

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
46
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Overview

This is a custom storage solution for the Kisrel UV Resin kit, integrated into the Honeycomb Storage Wall (HSW) system. It holds two 100g resin bottles and the oval UV light, keeping your workspace clean and your resin tools within reach.

Design & Remix Details

This model is a remix based on Kyz's HSW Connect Anything system. To provide maximum stability for the weight of two resin bottles, I utilized a four-connector wide base.

  • Modifications: I took the "single 1 high" connector and added a 52.48mm horizontal bar. This resulted in a 40.88mm distance to center, accounting for the 11.6mm connector housing. This structure was then expanded to four connectors for a rock-solid fit.

Recommended Print Settings

Printed and tested on a Creality K2 Pro (IP: 192.168.68.78).

  • Filament: PETG (highly recommended for chemical resistance to resin)

  • Nozzle: 0.4mm

  • Layer Height: 0.2mm

  • Walls/Perimeters: 3-4 (for connector strength)

  • Infill: 15-20%

  • Supports: No

  • Brim: No

Assembly

  1. Print the STL.

  2. Align the four connectors with your HSW grid and snap into place.

  3. Insert your Kisrel bottles and light.

Tagi