1 / 5
HSW Mount for Kisrel UV Resin Kit (Dual 100g Bottles & Oval Light) — image 1
1 / 5

HSW Mount for Kisrel UV Resin Kit (Dual 100g Bottles & Oval Light)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A sturdy Honeycomb Storage Wall (HSW) mount designed to hold two 100g Kisrel UV resin bottles and the accompanying oval

Rating
0 / 5
Likes
0
Downloads
9
Makes
0
Views
46
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Overview

This is a custom storage solution for the Kisrel UV Resin kit, integrated into the Honeycomb Storage Wall (HSW) system. It holds two 100g resin bottles and the oval UV light, keeping your workspace clean and your resin tools within reach.

Design & Remix Details

This model is a remix based on Kyz's HSW Connect Anything system. To provide maximum stability for the weight of two resin bottles, I utilized a four-connector wide base.

  • Modifications: I took the "single 1 high" connector and added a 52.48mm horizontal bar. This resulted in a 40.88mm distance to center, accounting for the 11.6mm connector housing. This structure was then expanded to four connectors for a rock-solid fit.

Recommended Print Settings

Printed and tested on a Creality K2 Pro (IP: 192.168.68.78).

  • Filament: PETG (highly recommended for chemical resistance to resin)

  • Nozzle: 0.4mm

  • Layer Height: 0.2mm

  • Walls/Perimeters: 3-4 (for connector strength)

  • Infill: 15-20%

  • Supports: No

  • Brim: No

Assembly

  1. Print the STL.

  2. Align the four connectors with your HSW grid and snap into place.

  3. Insert your Kisrel bottles and light.

Tags