QuickMag - Fully Printed AR15 Mag Pouch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully printed magazine pouch for AR15 magazines cloned from the ITW FastMag.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 913
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A fully printed magazine pouch for AR15 magazines cloned from the ITW FastMag. It can be mounted on MOLLE webbing or on a belt loop. TPU bands provide tension to keep the magazine securely in place. Primarily based on a Gen III FastMag with Gen IV mounting straps.
For each pouch, print all TPU parts and ‘QuickMag - Front’, along with either version of ‘QuickMag - Back - X’.
The MOLLE version has two ears that tuck under MOLLE webbing. The belt version can be mounted to a belt with the Belt Adapter or can be mounted to the front of another QuickMag.
Recommended Print Settings (Rigid Parts): Material: PLA+ Layer Height: 0.2mm Wall Line Count: 4 Infill Percentage: 20%+ Support: Tree | Recommended Print Settings (TPU): Material: TPU 95A Layer Height: 0.2mm Wall Line Count: 4 Infill Percentage: 100% Support: No |
|---|