QuickMag - Fully Printed AR15 Mag Pouch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fully printed magazine pouch for AR15 magazines cloned from the ITW FastMag.
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 168
- Makes
- 0
- Views
- 923
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A fully printed magazine pouch for AR15 magazines cloned from the ITW FastMag. It can be mounted on MOLLE webbing or on a belt loop. TPU bands provide tension to keep the magazine securely in place. Primarily based on a Gen III FastMag with Gen IV mounting straps.
For each pouch, print all TPU parts and ‘QuickMag - Front’, along with either version of ‘QuickMag - Back - X’.
The MOLLE version has two ears that tuck under MOLLE webbing. The belt version can be mounted to a belt with the Belt Adapter or can be mounted to the front of another QuickMag.
Recommended Print Settings (Rigid Parts): Material: PLA+ Layer Height: 0.2mm Wall Line Count: 4 Infill Percentage: 20%+ Support: Tree | Recommended Print Settings (TPU): Material: TPU 95A Layer Height: 0.2mm Wall Line Count: 4 Infill Percentage: 100% Support: No |
|---|