glass shower door magnet brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We moved into a house that had a glass shower door. It's nice, but it doesn't like to close exactly right when you're…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
We moved into a house that had a glass shower door. It's nice, but it doesn't like to close exactly right when you're in there, so I designed a couple of brackets with holes for magnets so that they help align the door to be aligned correctly. Works great! I had to use some double sided tape under the bracket U so get better traction, but again.. works great. My door is 9.25mm thick, and the magnets I used were ~6.4mm in diameter. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/abOJMvXEAlI
Instructions
Check the thickness of your door, if it's ok, print the model, acquire the ~6.4mm diameter magnets, jam them in the holes with pliers. You may need double sided tape to get the brackets to stick to the glass... like I did.
Category: Bathroom