FakeGoose Stick Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a poor imitation of a popular piece of climbing equipment.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 152
- Wydruki
- 0
- Wyświetlenia
- 1349
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- BSD License
You need a thin ¼-20 nut and a bolt.
No support material should be required. You may need to rotate before printing.
Attaches to a painter's pole or similar thread.
The “pole adapter” will likely break where it attaches to the other part. The swivel will constantly come loose. This is not a good design. Got me through a few weird hangers that the SuperClip couldn't handle though!
Do not trust your life to plastic gear. Buy the real thing. It's nice.
Improvement ideas:
- Add some angular features in the swivel to index at various angles
- Invert the screw arrangement and use a hex bolt an wing-nut
- Make angled feature on pole adapter twice as thick
2022/04/06: Updated. Accidentally uploaded an older version of this.