1 / 1
FakeGoose Stick Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a poor imitation of a popular piece of climbing equipment.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 152
- Makes
- 0
- Views
- 1,349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- BSD License
You need a thin ¼-20 nut and a bolt.
No support material should be required. You may need to rotate before printing.
Attaches to a painter's pole or similar thread.
The “pole adapter” will likely break where it attaches to the other part. The swivel will constantly come loose. This is not a good design. Got me through a few weird hangers that the SuperClip couldn't handle though!
Do not trust your life to plastic gear. Buy the real thing. It's nice.
Improvement ideas:
- Add some angular features in the swivel to index at various angles
- Invert the screw arrangement and use a hex bolt an wing-nut
- Make angled feature on pole adapter twice as thick
2022/04/06: Updated. Accidentally uploaded an older version of this.