1 / 4
Secretlab Magnus Pro XL Laptop Mount - Right side — zdjęcie 1
1 / 4

Secretlab Magnus Pro XL Laptop Mount - Right side

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Laptop Mount for Secrelab Magnus Pro XL

Ocena
0 / 5
Polubienia
1
Pobrania
33
Wydruki
0
Wyświetlenia
333
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a right side laptop mount for the Secret Labs Magnus Pro XL. The original model is not my work, but the right side of this desk has some wiring for the height controls. I used the Fusion360 model provided and cut out a notch for those. Depending on how heavy your laptop is, id recommend a lot of walls. I used 6 walls and 15% gyroid infill and its very strong for my 16" Macbook Pro M2.

This model could also be used on the left side of the desk, but the wire notch probably makes it slightly weaker than the original XL version.

Ive included a few options

  • the original 25.4mm diameter with a new cutout for the wiring on the right side

  • modified 17.8mm diameter with a new cutout for wires (this fit my mac better)

  • modified 17.8mm diameter with some ‘T’ shaped support at the bottom

    •  cut this in half to print without supports and the glue back together

if you dont need the Pro XL, check out this non-XL model

https://makerworld.com/en/models/991037-secretlab-magnus-pro-laptop-mount?from=search#profileId-966520

and the XL model i remixed from Printables

https://www.printables.com/model/1539863-secretlab-magnus-pro-xl-laptop-mount/files

Tagi