Secretlab Magnus Pro XL Laptop Mount - Right side
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Laptop Mount for Secrelab Magnus Pro XL
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 33
- Makes
- 0
- Views
- 333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a right side laptop mount for the Secret Labs Magnus Pro XL. The original model is not my work, but the right side of this desk has some wiring for the height controls. I used the Fusion360 model provided and cut out a notch for those. Depending on how heavy your laptop is, id recommend a lot of walls. I used 6 walls and 15% gyroid infill and its very strong for my 16" Macbook Pro M2.
This model could also be used on the left side of the desk, but the wire notch probably makes it slightly weaker than the original XL version.
Ive included a few options
the original 25.4mm diameter with a new cutout for the wiring on the right side
modified 17.8mm diameter with a new cutout for wires (this fit my mac better)
modified 17.8mm diameter with some ‘T’ shaped support at the bottom
cut this in half to print without supports and the glue back together
if you dont need the Pro XL, check out this non-XL model
and the XL model i remixed from Printables
https://www.printables.com/model/1539863-secretlab-magnus-pro-xl-laptop-mount/files