Counting matching models…
These spacers go in between the base of the chair and the armrests themselves. A friend of mine wanted his armrests lower, so that the chair could fit under his desk, so I made him some 25mm spacers. I figured somebody else might want a…
Simple clip to slip onto the cord frame so the power cord does not fall down if you run it along to the other side of your desk. Printed in PLA 100% infill 15 minutes.
Secretlab chair tilt handle replacement cause the original one wears out easily. 15 bucks is way too much for a flawed handle ._. Category: Office
Non-magnetic headphone hanger for the secretlab magnus gaming desk.
Spacers that fit the secretlab Titan 2022, and possibly other chairs. Allow the armrests to be lowered by an additional 25mm without getting in the way of the controls. Requires (per arm): 3x M8x50mm bolts 3x m8 washers (+optional split…
A headphone holder designed to fit in the frame of a Secretlab Magnus Pro desk with USB for easy charging of headphones. The holder just slides in the end of the frame with a slight press fit replacing the original end cap. The design has…
I bought the Secretlab Magnus Desk with the Premium PC Mount. I noticed that the PC mount does not support small form factor pc cases (like nr200p max). So here is an adapter you can simply click against the existing metal plate to extend…
This is a headphone holder designed for use with the SecretLab Magnus Pro sit/stand desk. The under desk post cover is removed and the holder slides into the “U” channel underneath. I personally use it on the up/down control side.
Single laptop mount for the Magnus Pro desk by Secretlab. Designed to slide into the left leg tabletop support. First remove the plastic cap, then slide the part down the support channel and replace the plastic cap. Print two or three for…
I made these simple castor cups as my old underlay and carpet was ruined from the castor wheel movements on my SecretLab Omega chair. I have the older 2020 Omega chair - no idea if the latest models (or Titan and different models) have…
Designed with integrated N45 magnets (16x6x2 mm) This model has three different versions: MMU Version : a version using multi-material printing to integrate different elements or colors. Logo Version : a standard model with the logo,…
A fairly simple dock for the Ugreen Revodock 213 for the Secretlab Magnus (Pro) It's designed to repurpose the M5 Screws in the legs of the desk. I have a fairly long hex wrench, so I made the screw holes are open at the bottom of the…
Non-magnetic hanging holder for the 8BitDo 2C controller. Hanger is quite simple in shape, should fit nicely without problem, inspired by https://www.printables.com/model/552010-headphone-hanger-for-secretlab-magnus but modeled to adapt…
This is an adapter bracket that allows a Secretlab Magnus Pro desk (desk leg) to be used with the Mac Studio Under-Desk Mount by Whity: https://www.printables.com/model/773919-mac-studio-under-desk-mount This model does not replace or…
WARNING : If you use this you won't be able to make the chair lean all the way back because the arm rest will collide with the two handles under the chair. It's fine if you remove the plastic part of the handle. (I'll try to design a…
Just my attempt at making the cable anchor accessories for the Secretlab Magnus since they are pretty easy to replicate. I believe the magnet slots are 8mm round and 2mm thick. Any material/layer height to print.
Have you ever been discouraged to sim race or play guitar on your SecretLab chair when you realized you will have to take out 6 long bolts to detach the armrests, and then bolt them back up once you're done? I know that I have. Be…
This is a right side laptop mount for the Secret Labs Magnus Pro XL. The original model is not my work, but the right side of this desk has some wiring for the height controls. I used the Fusion360 model provided and cut out a notch for…
UPDATE: 3-19-2026: I added 6 more models in total. 2 models with just a flat surface on bottom with no magnets. 4 models with a lip/top surface with no magnets. FOR THE MODELS WITH THE LIP ON TOP, USE TREE SUPPORTS. The models with the…
Print this model in the orientation of the STL or .3mf file .2mm layer height 1 Wall 0% infill Spiral Vase Print By Object
The Secretlab Titan Evo Final Fantasy XIV gaming chair comes with several magnetic role patches. A friend of mine really wanted the Dark Knight icon as a patch, so I made one with holes in the back for two 6x2 mm magnets.
I designed it specifically for the Apple Watch Ultra 3, but any Apple Watch will fit perfectly. I designed it so the charger fits tightly. It fits perfectly with the SECRETLAB MAGNUS PRO desk, using the already existing screws of the…
The Secretlab Laptop Mount Cable Clip is specifically designed for the Secretlab laptop mount. It ensures a tidy setup by securely holding cables in place and preventing them from slipping. With its clip-on design , cables can be easily…
I have been trying to free up as much space as possible on my Secretlab desk. Figured this would free up even more space and give it a neat little place to store them. I used this on my Secretlab Magnus Pro desk, but I would imagine it…
I had an old HOTAS setup that screwed onto the armrest to hold itself on. Since I just bought a very expensive gaming chair (as opposed to the $50 one I had before) I didn't want to damage the armrests. Since the Secretlab Titan has the…
Ideally, you should be able to remove the hook by removing three bolts underneath the chair. However, in my case, they were so tight that I couldn't budge them. So, I made this safety cover because it tore our sofa cover :(
Gridfinity holder for SecretLab Premium Leather Cleaner bottle and cloth, 2x2 non-stackable Thinkercad link: https://www.tinkercad.com/things/bzRNlnv0ae0-secretlab-leather-cleaner-bottle-and-wipe-gridfinity
The Armrest Tops on my Secretlab Titan 2020 chair have cracked and were due for a replacement. Secretlab's new CloudSwap system is great for different types of armrest tops but they are incompatible with the Titan 2020 chairs. This…
The magnets I used are located here: https://a.co/d/9AHg0B6 300mm Version Below: Read below to know how to cut out the magnet holes, ( If Bambu Studio doesn't cut them out for you ) In your slicer, ( I use Bambu Studio), to cut out the…
This was designed for SONGMICS LSD019B01V1, but might fit other desks as well. You will need 4 x M5 heat inserts for the adapter. Additionally you will need a spacer to maintain the distance from the desk mount. Available here:
The magnets I used are located here: https://a.co/d/9AHg0B6 200mm Version Below: Read below to know how to cut out the magnet holes, ( If Bambu Studio doesn't cut them out for you ): In your slicer, ( I use Bambu Studio), to cut out the…
I couldn't find a magnetic cupholder which suited my needs, or fit my 0,5 liter cups, so I've created this one. The idea behind it is that I didn't want to make moisture rings on my new secret lab desk, and I was afraid of the tall cups…
Secretlab Magnus Pro Laptop Mount with Desk Lip A laptop mount for the Secretlab Magnus Pro desk. It slides into the channel of the leg support like the original, and a lip on top rests on the desktop. Your laptop stands upright under the…
MINISFORUM TB4-01 holder for Secretlab Magnus Pro (under desk)
The spacer is installed between the chair seat and the mechanism. It changes the mounting angle by tilting the seat forward, helping the seat sit level instead of leaning backward. Required Parts: 2x M8 35mm 2x M8 washer Printing…
A clean, minimal stand for the Apple MagSafe charger (1st gen, A2140), designed for the Secretlab Magnus Pro desk and its magnetic desk mat. Puck stays put: it sits in a snug 56.1 mm pocket with six small snap lips, so it won't pop out…
This is a headphone holder designed for use with the SecretLab Magnus Pro sit/stand desk. The under desk post cover is removed and the holder slides into the “U” channel underneath. I personally use it on the up/down control side.
