LTT Screwdriver Holder, Secretlab Magnus Pro Desk
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use this with magnets or VHB to hold the screwdriver on the front of your Secretlab desk. Read Description
- Rating
- 4.5 / 5
- Likes
- 7
- Downloads
- 29
- Makes
- 3
- Views
- 660
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
UPDATE: 3-19-2026: I added 6 more models in total. 2 models with just a flat surface on bottom with no magnets. 4 models with a lip/top surface with no magnets. FOR THE MODELS WITH THE LIP ON TOP, USE TREE SUPPORTS. The models with the lip/top surface should ONLY HAVE VHB PLACED ON THE SIDE WALL, not the Top or Bottom surfaces, there is not enough room for VHB and it will not fit if you place VHB Tape on the top or bottom.
The files are now separated with folders to make things more tidy. These can be used with double side tape or whatever adhesive you want. The models with the lip/top surface are named accordingly to whether they should be used with a desk mat or not, so make sure you print the correct one. :)
Also, fixed a few typos... :\
Thanks to https://www.printables.com/@DocHoliday_1971031 for the idea :)
I have included two orientations per couple of versions, so you can pick which direction you want to tip of the screwdriver to face when you put the screwdriver in the holder.
NOTE: I only tested this working on the front of the desk as shown in the photos. I tried it on the side of the desk, but it is not magnetic.
This magnet models require supports for the 3 bottom pockets for the magnets.
I printed in PLA, Elegoo Black, but choose whatever you want. If you have a multi color printer, it would be easier to combine two unlike filaments, which given the right combination, would make it easier to get the supports out. This is just some random google search to a bambu labs forum thread I found, but is the same idea: https://forum.bambulab.com/t/support-filament-petg-for-pla-and-pla-for-petg-and-more/5942
I included a magnet cover that you can super glue into place to help hold the magnets in their pockets.
The magnets I used in the photos are here: https://a.co/d/2zYo3gV
These are the magnets I wanted to use, which were black to match the filament, but they got the order cancelled for some reason: https://a.co/d/e15W4aL
Either one will work, they are the same size, just not sure what happened in my order, haha.