Counting matching models…
Mounts for the regular LTT screwdriver and the precision screwdriver. Easy to grab, easy to return, hard to fall off on its own. Low material usage and footprint. Both designs require an empty insert If the stubby selection ring and shaft…
They are finally here, CPU cases for your organization needs! Versions Included: 17XX 1851 Holder V12 20XX Holder V5 115X 1200 holder V8 AM4 Holder V11 AM5 Holder V8 Tools required: Hammer Extra Materials: 2 x 2D finishing nail 1" (25mm),…
LTT Precision screwdriver bit set IKEA Skådis | T Nut System The holder is compatible with the T Nut system for Skadis developed by @6d6178 and uses 2 T Nuts with M2.5 screws (12mm length / 14mm length). This model prints cleanly in its…
Holder for the LTT Screwdriver for attachment to an Ikea Skadis pegboard. It uses special pegs designed by @KimJanosch. These can be found here: Skadis/ SKÅDIS universal peg
Changed the magnet sockets to use 10x2 mm magnets and added an indentation in the bottom of the magnet socket in case glue was needed. I removed a column of bit sockets (plus 1) and the original screwdriver socket to make room for the…
Not exactly Noctua brown and beige but unless Prusa wants to hit me up, that's what I got.
First 10 layers are the plate, Colorchange needed at beginning of layer 11. Note: This is a bit of a 3D printer unfriendly model. i imported the STL shared on reddit, padded it onto a plate and printed it. The dimensions of the lines and…
As requested, a print in place variant of a rugged box case for the LTT screwdriver. Both Noctua and regular editions are available as well as a non-multicolor capable printer for the regular version, just print the LTT logo and insert it…
I edited the logo of the top lid to include the original circle with the LTT text, aswell as adding an additional outer ring for contrast when logo and case are the same color otherwise (see photos) LTT Case - Lid_Full Logo.obj includes…
I designed a lid for the original box that has text in the lid for ease of identification while keeping things for getting in the box.
A simple remix to adapt @Ceroo_268525 very nice holder for the LTT precision screwdriver case to be compatible with standards 1 inch spaced holes peg boards. The pegs themselves were salvages from EMBoyd's Peg Board System which can be…
A tray and cover to protect the CPU pins on the LTT recycled CPU fidget spinner with holes in place to still be able to spin the fidget while protected as well as thumb holds to make it easily removable. It's a friction fit so you don't…
Made my girlfriend a batch for her keychain. Did a few, and also added the models without the hole for the keychain. Printed it on a MK3 - with manually changing the filament (as you can see in the screenshot).
This is a remix of "LTT Commuter Backpack Strap Clip." My hockey pants clip broke at the waist tightening area. I really couldnt tighten my waist very well and the strap was just annoying. I saw this and the one side worked perfectly, but…
Model Git: https://github.com/GregoryLand/StubbyLTTScrewdriverGridfinityHolder/ Used this 3D model to create the cutout. https://www.printables.com/model/676695-ltt-stubby-screwdriver
Just a small block to hold two pairs of LTT Sticklocks, for when they're not in use on a controller. It's pretty much just a block with four joysticks on it. Figured that if it was something I thought would be neat to have, then maybe…
My single complaint about the Scribedriver is that they are too thin for my hands, making them uncomfortable to write with. To solve this, I 3D printed pen grips out of TPU for the Scribedriver. The TPU material still comes out harder…
This is a way of holding the LTT Screwdriver on SKADIS peg boards
I designed my own Version of MAIRA's affordable DIY belt tensioner. Much smaller and more rigid with an excluded PSU. Documentation: https://mairapp.com/home/maira-seat-belt-tensioner-kit/ Please read both manuals before starting this…
Display your LTT Coin. I hope this black coin is sufficient for you. Please don't make me feel bad because I do not have a green or pink coin like you. We all strive for perfection, but not everyone can reach it. Please accept this small…
A simple Gridfinity baseplate sized for the LTT Backpack . I didn't find anyone else having made one, so I decided to give it a try. I first tried various Gridfinity generators, with the idea of then using that as a base, and enforcing it…
I used the LTT Screwdriver Mockup to make a this LTT Screw driver and 32 bit holder
Square 20mm (LTT) Bit Holder UPDATE: Added Parametric Fusion files for any number of rows/columns! Logo can also be enabled/disabled via parameters. A square, lower volume version of the original.. with magnets! Had 1 too many instances…
Check out the Updated Square Box version . Lower profile, has magnet inlays, and includes models with engraved labels. A 24 bit holder for “shorty” 20mm screwdriver bits. Category: Tool Holders & Boxes
Just a remix, add a pause in your slicer and then drop the magnets in place. They hold the strong magnets just fine for
Modified from Mikhail design to work with Multiboard. Nice snug fit compared to generic screwdriver holders. Works with standard Screwdriver and Stubby screwdriver. Linus Tech Tips Screwdriver.
use same print settings as for the Multiboard project.
I was used to my LTT backpack always slumping forward, and one day at work, I noticed a TripLight surge protector box fit snugly and stopped it from leaning forward. So I quickly tossed a model and a printer to place at the bottom of the…
magnetic mount / holder for the ltt screwdriver requires 2 20mmx5mm magnets and some super glue tested on pla with support for the holes. probably works for any solid filament
Hej! Have an Ikea SKÅDIS pegboard AND an LTT screwdriver? Have nowhere to put the screwdriver? Then this is the model for you. Conveniently store your LTT screwdriver on the wall and easily grab it whenever a project need arises.
Nice snug fit compared to generic screwdriver holders. Works with LTT Precision Screwdriver. Linus Tech Tips Screwdriver. Modified from Mikhail design to work with Multiboard.
If you print this and buy 40mm wide strap, you will be able to take your LTT Tech Sack with you over the shoulder. I have also made a part that will enable you to take it with you hanging on your fingers. How I printed it (naming scheme…
Found a multiboard version of a LTT Precision Screwdriver (in full bit storage case) but wanted to adapt it for standard pegboard mounting. Printed in PLA with supports on for the pegs. Came out good! You may need to re-slice with your…
Holder for the Linus Tech Tips (LTT) Precision Screwdriver to mount on your Honeycomb Storage Wall. Quick and dirty model, needs support on the bottom but prints well and fits snug.
Mount your Airpods Pro 2 Case to your LTT WaterBottle. I dont have pockets on my gymshorts and dont want to carry more stuff. Works pretty well. could maybe be a little bit tighter. I will update the STL files if this proves to be an…
Replacement for the Arms of the Belttensioner designed by Wotever. Additional parts needed: 1x M8x70 Bolt (50mm Belt) or 1x M8x100 Bolt (76mm Belt) 1x M8 Nut (to hold the M8 Bolt) 1x M8 Washer (8,4x20x1,25mm) 2x M3x10 Bolt (to hold…
Created a case to hold the LTT Stubby Screwdriver together with up to 36 extra bits. There are also versions to hold the Extension and one to Hold the Extension + LTT Pen. You will require 8 m3x20mm machine screws
Now featuring rounded edges Suggested print settings: Infill: 10% / Gyroid Perimeters: 2 Top-/Bottomlayer: 3 each (2 might do but the extra one is worth it for looks and rigidity Layerheight: 0.15mm with Variable Layer Height for better…
UPDATE: 3-19-2026: I added 6 more models in total. 2 models with just a flat surface on bottom with no magnets. 4 models with a lip/top surface with no magnets. FOR THE MODELS WITH THE LIP ON TOP, USE TREE SUPPORTS. The models with the…
Designed and tuned for use with PETG or alike. Stock settings all around. Very easy to print without supports. The screwdriver clips in, it wont fall out if mounted at any crazy angle. Clips right on the balance point thanks to the…
Mounts for the regular LTT screwdriver and the precision screwdriver. Easy to grab, easy to return, hard to fall off on its own. Low material usage and footprint. Both designs require an empty insert If the stubby selection ring and shaft…
This is my take on a LTT Screwdriver Holder based on the Refined Gridfinity design, with slot in 6x2 magnet holes on the corners for the glue adverse. I included a neat Hex Pattern design on it, which is actually what inspired the entire…
1x1 Gridfinity module based on the Refined Gridfinity bins for Linus Tech Tips Screwdriver with Hex Pattern. Optional 4 6x2 magnets slots no glue needed. The 6x1 Horizontal version can be found here . Feel free to leave any feedback, or…
Adds more bits to MelSK 's model to hold all 60 extra bits. Both top and bottom are modified, but the latch and hinges are the same. You'll still need 8 m3x20mm machine screws.
I got a LTT Precision Bit Set + Case as a gift to replace my older, cheap tool set. While the set included a much nicer driver and easier method to get the right bit, it left me wanting for space to store other tools I typically use at…
My bits were too tall for the box so I created a deeper lid for LTT Screwdriver "shorty" 20mm Bit Case/holder
Remix based off of erer2001 's design & Riffnshred 's design UPDATE (01/21/25): Changed size of casing to reduce wobble and infill density for better durability Holds 12 20mm bits or 6 regular bits Print in PETG or PETG-CF Will need:…
Holds the LTT Precision Screwdriver at a nice angle for easy use. Designed to mount on a desk/shelf with a small screw. Print Settings Rafts: No Supports: Yes **Resolution:** 0.2mm Infill: 15% **Filament Material:** PLA Category: Tool…
The handle on the LTT Tech Sack is a little small, so I wanted to make something a little easier to grab quickly. Made with flex PLA and a couple key rings, it ain't much but it's an improvement.
About A simple yet secure holder for the Precision Bit Set + Case for the Ikea Skadis pegboard using the Skadis Ultimount connector. The original design was based on the iFixit Mako Screwdriver Mount for Ikea Skadis Print instructions…
Took the official screwdriver mount by LTT which was originally designed for their own Magnetic Cable Management Power Bar Key solution and adapted it to be mounted on your regular skadis wall. It uses the very easy to use Skadis T-Nut…
This Remix of the SBK Screwdriver Holder replaces the magnet mount with a tapered hole that accommodates most common construction screws; including Drywall, Chipboard, Woodworking, Metal self tapping, drywall anchors and Concrete Screws…
Remix of the official LTT Screwdriver with added hooks for IKEA Skadis boards
I wanted to use the LTT designed holder for the LTT screwdriver, so i thought i would modify it to suite. Havent had a chance to test supports yet. If you do download and print it, let me know how it goes and what supports were used.
This does not require modification to the LTT Precision Screwdriver Bit Set. It uses the existing metal pins located in the corners of the bottom of the bit set that are usually used for snapping the lid to the back. In addition to the…
I have both a stubby and regular screwdriver and needed a holder for both. The original holder is too wide to be placed next to each other, so I doubled it and cut the overlapping part in the middle. Fortunately it worked.
A combination of the LTT screwdriver holder with some SKADIS hooks on the back. Sits pretty secure on the board. Printable in the attached orientation without supports but make sure you have good bed adhesion. Alternatively printable…
Remix of a model I found on here. Originally intended for a Peg Board. If you have or want the Peg Board version please refer to Les Burris' post link below. I removed the pegs and made the back solid so I could stick this on the side of…
Wanted to keep my LTT Bitcase organized next to my screwdriver so I designed this small holder for the IKEA Skadis wall. It should fit all sizes of the bitcase but I havent tried the smallest one for 12 bits but it should be enough…
BaBo insert for the LTT Precision Screwdriver that fits in the [BaBo] drawer modul 60 by Willi 3D. It is a 4x6 insert.
Saw that LTT released a 3d model of a holder for their screwdriver to use with their MCM power bar. I have a Wall Control pegboard, figured i would remix to work with an off the shelf magnet. Didn't work, it would just slide down as soon…
Capable of being mounted on 1 U or between 2 U's To mount on a single U the top hole can be easily sliced off Designed to be mountable on the middle holes of 2 Us on top of other mounted equipment as long with longer screws
Introducing the LTT Precision Screwdriver Case ‘ Insert replacement’ . Designed in FreeCad, this is my first fully (mostly..) Parametric project! Whether your original Foam insert is worn out or ripped, this printable insert replacement…
NLTT Magnetic Cable Holders – The Ultimate Cable Management Arches Tired of messy cables? The NLTT (Not LTT) Magnetic Cable Holders bring a sleek and efficient solution to your setup. Designed in the iconic cable management arch style ,…
This case is designed to hold 60 short bits from the LTT screwdriver set in a compact form factor, prioritizing space efficiency over ease of access. While adjacent bits can’t be removed simultaneously, you can take out multiple…
This model stores 60 LTT Ratching Screwdriver bits, or 5 sets of 12 LTT Screwdriver bit sets , along with the Screwdriver Shaft Extension . All bits are held down with small magnets and the shaft extension has a special holder that…
Science can't explain how magnets work yet, but that doesn't stop us from using them anyway. 28 of them, to be precise - ⌀ 4mm x 2mm. Simply a print in place box to fit the LTT Precision Multi-Bit Screwdriver and additonally 18 4mm bits…
simple ltt screwdriver and bit holder for ikea skadis board. i used instead of bolts two springs to make it spring loaded.
They are finally here, CPU cases for your organization needs! Versions Included: 17XX 1851 Holder V12 20XX Holder V5 115X 1200 holder V8 AM4 Holder V11 AM5 Holder V8 Tools required: Hammer Extra Materials: 2 x 2D finishing nail 1" (25mm),…
My unofficial wall mount for the LTT Store Screwdriver
A Cupholder made to fit the center console of the Tesla Model 3. It fits both the 21oz and the 40os.
This is an internal frame for this product - https://www.lttstore.com/products/pet-cave I designed and printed it so my cats won't crush the shape of a monitor and disturb my gf (pet cave is sitting on her table like double monitor setup)…
Modified the holder to fit a Intel FCLGA1356 CPU (XEON E5-2420V2)
The angled bit holder allows the model to hold full length bits at the cost of the amount of bits it can store. I recommend adding some small magnets in the bottom to hold the bits secure and to stop ratteling, but the bits can't get out…
I purchased a LinusTechTips Commuter Backpack and wanted a simple and minimal backpack ID tag. So I modeled a tag in Fusion360 but used PrusaSlicer to add my text. I can't show the text, but it's on the other side! You can use the pause…
For holding the LTT Linus Tech Tips Scribedriver Bolt Action Pen. Has room on the back for 8mm wide magnets. Make sure to use strong magnets as there are 2 layers of space between the pen and magnet. I taped in the magnets instead of…
Designed to hold 6 LTT CPU cases https://www.printables.com/model/1191951-ltt-cpu-cases
I really liked MelSK’s design for the standard LTT screwdriver and used it until I acquired the stubby and shaft extension. Wanting a way to store all of them in one case, I decided to expand on the original concept while still utilizing…
This model is designed to hold LTT screwdrivers using the MCM Power Bar Key (PBK) from LTTStore.com, which features the strongest magnet in their MCM line and a versatile ¼-20 thread. By removing the pull tab from the PBK and attaching it…
Gridfinity bin for the LTT Screwdriver with space for the extra bits
This is my first projects, so if there is problems, please feel free to give me a heads up or make the changes your self. The top and bottom parts are separerede. Prusa Slicer Size[world]: Top: X 55. Y: 67,01. Z: 6,07. Bottom: X: 55. Y:…
Pegboard Storage Shelf for “LTT Screwdriver Bit Holder/Storage Print in Place” @ken_590448
Pegboard mount for LTT screwdrivers and the extension
Precision Screwdriver Bit Holder Case This case holds 40 precision screwdriver bits securely while allowing for easy removal. Simply lift the bits out of position when needed. The box is held together using magnets , avoiding the need for…
Ei mainoksia -kyltti tarran sijaan. Uusi Prusaslicer (2.4) havaitsee, että kyseessä on kyltti ja osaa ehdottaa värin vaihtoa oikeaan paikkaan. Olen yhteen tällaiseen tussilla merkinnyt nuo ulkonevat kirjaimet ja reunuksen, hyvin on sekin…
Puck / holder for camper or caravan carpet A very simple design, but extremely helpful for avoiding tripping hazards. I use the part with 8 x 250 mm pan head screws with TX40 drive. ---------------------------- Puck / Halter für…
The knurling on the LTT stubby screwdriver is great, it is sharp, works flawlessly, but isn't the best for just tossing the screwdriver in your bag with other things as it may scratch or tear something while you carry it around. This is…
a remix of the original holder for hte LTT precision kit, to match the honeycomb storage wall
This case is completely modular, so that it can be compatible with any screwdriver you own small enough to fit inside. The maximum length for a screwdriver should be about 16.8cm. It can hold up to 70 different bits, giving you enough…
Made for the Pi Zero (Original/W/2) without pre-soldered GPIO or heatsinks (some heatsinks might work but your mileage may vary.) Proportions are as close as possible to the real deal Screwdriver- obviously some design compromises were…
The LTT design for the 20xx cpus works well for the E5 v1 and v2 chips as the IHS is perfectly square. However the v3 (2011 v3) CPUs have little wing extensions to the IHS that interfere with the design. This model simply has an extra cut…
Simple LTT Screwdriver holder for Multiboard
![[BaBo] Insert for the LTT Precision Screwdriver](https://media.printables.com/media/prints/1164247/images/8771584_957b1cf6-7206-4c20-a315-f66cfd2cdfb1_8f498585-2dfb-4724-857b-00877cf11153/img_1395.jpg)
