1 / 3
Skådis / Skadis - LTT Screwdriver
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Skadis mountable holder for LTT Screwdriver. Should work fine with other Megapro and other screwdrivers as well.
- Rating
- 4.941 / 5
- Likes
- 154
- Downloads
- 1,033
- Makes
- 21
- Views
- 5,271
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Use with Ikea Skadis system and T-Clips to mount (see remix section).
Be sure to print a T-Clip to go along with this model.
After inserting the T-Clip fully, turn the printed model on its side, attach it to the Skadis board, and rotate clockwise 90° or until the printed model is in the correct orientation. Do not overtighten the model or the T-Clip might bend/break. If so, simply print a replacement T-Clip.
To remove, turn the printed model counterclockwise 90° and pull outward.