Counting matching models…
When a rotating cylinder (or sphere, for that matter) meets a transverse airflow, lift is generated by what is known as the Magnus effect. This is the same phenomenon that causes ping pong balls, tennis balls and soccer balls to curve in…
Couldn't find a good model of this staff online for 3d printing so I made one myself. all pieces can be printed without without supports. There's is a hole in the bottom of the staff made for a rechargeable li-ion battery as well as as…
Non-magnetic headphone hanger for the secretlab magnus gaming desk.
This is a the same robot from the US comic series “Magnus Robot Fighter” but in a different pose than the one I published a few days ago … this one also appears in the 2010 published US comic book series. Since this model has not been…
Hey here is a 28mm gnome wizard, his name is Magnus Trouttickler. He is best printed in resin, a supported version is provided but only his beard needs supporting and he has also been printed on an FDM printer! If you're interested in…
My nephew wanted a staff for Halloween, saw this design and loved it. I wanted to make it a little more sturdy so took out middle section of staff and replaced with PVC. Also took off the bottom light crystal and opted for a less…
Bobble the head of your favorite City Commander! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from the…
A set of various hooks for pegboards with 10 mm square holes spaced by 38mm, branded as Magnusson, Wolfcraft and other. As usual with my models, I made them editable by a spreadsheet in FreeCAD = you don't need paid software to edit them…
I made this as a coin or medallion prop for a DnD campaign. Printed it in PLA Oh My Gold filament using a 0.25 mm nozzle and 0.1 mm layer height, but 0.4 nozzle should work fine too. I added the coin version and the gyro version aswell.…
The Shattered Glass Ultra Magnus figure includes parts from the Legacy G2 Laser Optimus Prime, including a red Matrix. However, there isn't a good place to store that piece in robot or vehicle mode. This adapter piece allows the Matrix to…
A headphone holder designed to fit in the frame of a Secretlab Magnus Pro desk with USB for easy charging of headphones. The holder just slides in the end of the frame with a slight press fit replacing the original end cap. The design has…
I needed a dozen or so of these, and there was no reason to purchase the metal ones from Secret Lab when I could knock together a quick model print and attach magnets. I printed these on my X1C using some generic PLA to test, and will…
This is a headphone holder designed for use with the SecretLab Magnus Pro sit/stand desk. The under desk post cover is removed and the holder slides into the “U” channel underneath. I personally use it on the up/down control side.
Secret Labs offer a magnetic headphone hook for their desks, and its fairly cheap! However I didnt want to wait for the postage, and so I made my own. I started off with a headphone holder for the bose QC35s, and modified it to take some…
Soft jaws to fit the 125mm Magnussen vice. Magnets are to be be fitted in the back to hold the jaws in place. F3D file attached if you need to adjust this design to your own vice. I have a horizontal groove through the whole softjaws to…
I wanted to fly something that would get a reaction from people eat the club field, so I designed this! 14mm carbon fiber tubes for the mast/ chassis and landing gear. 12mm carbon fiber tube for the rotor. 18x12x4 low friction bearings.…
This is a the same robot from the US comic series “Magnus Robot Fighter” but in a different pose than the one I published a few days ago … this one also appears in the 2010 published US comic book series. Since this model has not been…
I am sure the Magnus version works just fine but I couldn't find any in stock and decided to just make my own. I used a piece of scrap from a Goldtip Hunter shaft that measured 7.6-7.7mm in diameter and glued it in the end. That way it…
Single laptop mount for the Magnus Pro desk by Secretlab. Designed to slide into the left leg tabletop support. First remove the plastic cap, then slide the part down the support channel and replace the plastic cap. Print two or three for…
this is my magnusson socket holder for my toolcart
I needed to store flat in a drawer. It only just fit, so I cut out the sides so that you can pick it up easier. I spent far too long customizing this bin for a snug fit, I have a gridfinity problem.
This is my verson from gridfinity baseplate for my magnusson toolbox
Print with supports for the skadis hooks.
There are three alternate versions depending on how you want to print the missle. The fins are the hardest part, but can be printed if you lower your nozzle temp. Models in photos printed with PLA @ 190 degrees, 0.08mm layer height on…
Well ... I love 3D Printing ... I like and collect robots ... but I suck in modeling. I always was quite bad at the art lessons in school long time ago. But I had some budget and some models I was looking for for quite some time … So I…
Not wanting to pay for an expensive headphone hanger from SecretLabs, I decided to design and print my own. This isn't the strongest hanger around but it gets the job done for my Arctis Pro 7's. I made the top of the hanger a wedge that…
Reference Files for the 4UAD Magnus Pro, incase you need the reference files for fitment into other parts, etc
Non-magnetic hanging holder for the 8BitDo 2C controller. Hanger is quite simple in shape, should fit nicely without problem, inspired by https://www.printables.com/model/552010-headphone-hanger-for-secretlab-magnus but modeled to adapt…
This is an adapter bracket that allows a Secretlab Magnus Pro desk (desk leg) to be used with the Mac Studio Under-Desk Mount by Whity: https://www.printables.com/model/773919-mac-studio-under-desk-mount This model does not replace or…
Charlemagne (Carolus Magnus) – Buste 🇫🇷 Description (Français) Ce buste représente Charlemagne , également connu sous le nom latin Carolus Magnus , l’un des souverains les plus influents de l’histoire européenne. Roi des Francs à partir…
Pour les 6 mini limes MAGNUSSON
These are designed to store small screws, washers, nuts, magnets etc that I use in my 3d printed parts and printers. There are a lot of sizes to find somewhere to store and while these types of organisers are great, theyre not designed…
I'd suggest printing using Tree supports in mesh mixer for best results. Example model was printed with 0.08mm layer height on ender 3 v2, PLA @ 190 degrees
Video demo here: https://www.youtube.com/watch?v=t1rVaYrEfto Does exactly what it says on the tin, allows your magnus to hold six mega darts. BoM 5 6-32 x 0.5" SHCS screws for mag bodies 1 6-32 x 1.5" for mag follower one constant force…
This is a different robot from the US comic series “Magnus Robot Fighter” … this one also appears in the 2010 published series. Since this model has not been designed by me full credit goes to the artist. On this robot it is “k3dwin”.…
this a gridfinity holder for magnusson flat screwdriver
This is gridfinity baseplate for my big magnusson toolbox. you can find baseplates for the small toolbox here https://www.printables.com/fr/model/500597-gridfinity-baseplates-magnusson-toolbox
it is a magnusson screwdriver sockets gridfinity holder for my toolbox
I already shared this model including Resin print files … but somehow I needed to do a 80cm version … Since they have not been designed by me full credit goes to the artist. On this robot it is “dasunmadushanka”. Here is the link to his…
This is a different robot from the US comic series “Magnus Robot Fighter” … this one also appears in the 2010 published series. Since this model has not been designed by me full credit goes to the artist. On this robot it is “k3dwin”.…
This is a right side laptop mount for the Secret Labs Magnus Pro XL. The original model is not my work, but the right side of this desk has some wiring for the height controls. I used the Fusion360 model provided and cut out a notch for…
this is a gridfinity holder for my magnusson socket wrench
UPDATE: 3-19-2026: I added 6 more models in total. 2 models with just a flat surface on bottom with no magnets. 4 models with a lip/top surface with no magnets. FOR THE MODELS WITH THE LIP ON TOP, USE TREE SUPPORTS. The models with the…
A Magnus masterkey for the Xshot MPP, it is based on the geometry of my Retailator shroud remix. It most likely fits other blasters or shrouds with picatinny rail, but the rear filler piece may need adjusting. I used ScratchCampball's…
Tis is a holder for my handle screwdriver for my toolbox
Print this model in the orientation of the STL or .3mf file .2mm layer height 1 Wall 0% infill Spiral Vase Print By Object
this a gridfinity holder for my electrical screwdriver
I didn't have any spare arrow cutoffs to use ryhno00688's design. This adds the straight section instead of gluing in an arrow shaft. I also brought the tapered section on the top of the adapter down to allow this to sit as high as…
Use the guide to get the correct protrusion when using a Magnusson Honing Guide. OpenSCAD file can be used to customise for other honing guides. Printed in PLA.
POUR LES LIMES DE MAGNUSSON MERCI DE METTRE UNE PHOTO DE VOTRE REALISATION
this is my gridfinity holder for my magnusson wrench
This is my take on Ultra Magnus from Transformers. You may need to rescale this design to fit your needs
Support pour lames de cutter MAGNUSSON
I designed it specifically for the Apple Watch Ultra 3, but any Apple Watch will fit perfectly. I designed it so the charger fits tightly. It fits perfectly with the SECRETLAB MAGNUS PRO desk, using the already existing screws of the…
Remix Gridfinity pour pied à coulisse Magnusson et 3 piles LR44 1X2X6
this is a gridfinity holder for my precision screwdriver from magnusson screwdriver set.
Print it with PETG. PLA should work fine too but it might be harder to insert. External dimensions : 25mm Internal dimensions : 24mm The cap is made to be tight. Use the screw clamp to force its complete insertion
Replacement Quick Release Mount Plate for the Magnus TR-13 and TR-17 tripods. REQUIRES one ¼"x20 ¾ inch long machine screw. printed in PETG at 60% infill
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Longstrike and Retaliator barrel versions for Stryfe. Also different non specific…
this is my gridfinity older for my magnusson socket spanner. I split in 2 parts for my elegoo neptune 3 pro
quick model to hang headphones on the underside of magnus desk. solidworks model file included to make modifications easier for anyone.
I created a small spacer/mount to securely store my macbook next to my PC on the PC Hanger of my Secretlab Magnus Pro desk. Features: - V1 only features a back stop, so it can fit laptops with pretty much any screen size. - V2 features a…
Gridfinity bin for Magnusson box cutter 5x2 with blades holder. You can get the blades from the holder without taking it out. Fits loosely the cutter but tightly the blade holder so that it stays in place as the idea is to be able to…
Pegs may give you trouble if so, print at 98% infill The clips I jammed in with a hammer. Apply glue to surfaces after you test fit with pegs and before you put in the clips. You can transplant the rubber pad from the old broken handle.…
Takes 8 10x2mm magnets; requiring a PAUSE to be inserted immediately prior to the top level over the holes. During the pause, the magnets can be inserted, with 2 used per hole. The holes are designed with just enough clearance that the…
Proudly display your favorite fidget! One version shows MAGNUS in his personal typeface, the other is blank for all of your other favorite brands and makers. Not the strongest design but is thin enough to ensure the magnet grip of your…
Just another set of Pump Grip scales for a Magnus Master Key. These are ment to be permanently afixed with epoxy or your glue of choice.
I couldn't find a magnetic cupholder which suited my needs, or fit my 0,5 liter cups, so I've created this one. The idea behind it is that I didn't want to make moisture rings on my new secret lab desk, and I was afraid of the tall cups…
Secretlab Magnus Pro Laptop Mount with Desk Lip A laptop mount for the Secretlab Magnus Pro desk. It slides into the channel of the leg support like the original, and a lip on top rests on the desktop. Your laptop stands upright under the…
MINISFORUM TB4-01 holder for Secretlab Magnus Pro (under desk)
A clean, minimal stand for the Apple MagSafe charger (1st gen, A2140), designed for the Secretlab Magnus Pro desk and its magnetic desk mat. Puck stays put: it sits in a snug 56.1 mm pocket with six small snap lips, so it won't pop out…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Longstrike and Retaliator barrel versions for Stryfe. Also different non specific…
Matrix for Optimus and Ultra Magnus G1 with a base to integrate it into the chest. The matrix is separated into 4 pieces
Takes 8 10x2mm magnets; requiring a PAUSE to be inserted immediately prior to the top level over the holes. During the pause, the magnets can be inserted, with 2 used per hole. The holes are designed with just enough clearance that the…
This is my take on Ultra Magnus from Transformers. You may need to rescale this design to fit your needs
I created a small spacer/mount to securely store my macbook next to my PC on the PC Hanger of my Secretlab Magnus Pro desk. Features: - V1 only features a back stop, so it can fit laptops with pretty much any screen size. - V2 features a…
Proudly display your favorite fidget! One version shows MAGNUS in his personal typeface, the other is blank for all of your other favorite brands and makers. Not the strongest design but is thin enough to ensure the magnet grip of your…
A set of various hooks for pegboards with 10 mm square holes spaced by 38mm, branded as Magnusson, Wolfcraft and other. As usual with my models, I made them editable by a spreadsheet in FreeCAD = you don't need paid software to edit them…
Couldn't find a good model of this staff online for 3d printing so I made one myself. all pieces can be printed without without supports. There's is a hole in the bottom of the staff made for a rechargeable li-ion battery as well as as…
POUR LES LIMES DE MAGNUSSON MERCI DE METTRE UNE PHOTO DE VOTRE REALISATION
This is gridfinity baseplate for my big magnusson toolbox. you can find baseplates for the small toolbox here https://www.printables.com/fr/model/500597-gridfinity-baseplates-magnusson-toolbox
This is a headphone holder designed for use with the SecretLab Magnus Pro sit/stand desk. The under desk post cover is removed and the holder slides into the “U” channel underneath. I personally use it on the up/down control side.
Zipping in next to join the Iconic Ships series - here's Ultra Magnus' Ship from IDW Wreckers! A blocky looking ship powered by a pair of twin engines, this ship cuts an imposing presence on the Iconic Ships base. Devoid of any external…
To help complete the get up for Animated Optimus Prime, here's the Magnus Hammer! And here's Prime wielding it when it has its internal lights turned on (more on that in a bit!). One thing to note here, is that the lights appear different…
just a click together action figure and let me if you make it and I will add it to the cover
it is my first transformer custom please leave a reavew and let me know any problems you have thank you
Sven Magnus Øen Carlsen is a Norwegian chess grandmaster. Carlsen is a five-time World Chess Champion, five-time World Rapid Chess Champion, and the reigning eight-time World Blitz Chess Champion. Filaments Used: PLA BambuLab Basic Black…
Convert your Anet A8 Plus to a big Bear What is Ultra Magnus? The Ultra Magnus upgrade aims to take the, very affordable, Anet A8 Plus and put it on-par with the Bear Upgrade for the Prusa Mk3 printers. It is the big brother to the Mega…
Spring Spacer v2 --- Nerf MEGA Magnus Spring spacer for the Nerf MEGA Magnus to get a bit more pre tension and FPS with the stock spring. Just put it on the rear spring post like shown on the picture (the ring-shaped recess on the spacer…
Inspired by the Skybound comics, here's the giant sword wielded by Ultra Magnus as he leads the Autobots into combat with the 'cons! First, here's SS86 Ultra Magnus sporting this sword. But due to the forearm piece obstructing the base of…
To complete Magnus' setup as he leads the Autobots into combat, here's his blaster from the Skybound comics! This beefy piece fits right into his hand and is ready to rain down some punishment upon the 'cons! As usual, we've designed a…
Matrix for Optimus and Ultra Magnus G1 with a base to integrate it into the chest. The matrix is separated into 4 pieces
Pape Léon Ier le Grand (Leo Magnus) – Buste 🇫🇷 Français Découvrez ce buste imprimable en 3D représentant le pape Léon Ier le Grand (Leo Magnus) , considéré comme l’un des plus importants papes des premiers siècles du christianisme. Cette…
![[Iconic Ships Series] Ultra Magnus Ship from Transformers IDW Wreckers](https://media.printables.com/media/prints/1043284/images/7909097_ceb7a3da-e773-48bf-9baf-861ccdb8a1d0_390bbae6-52f4-4ad5-b8f9-182a6d752d32/ultramagnusship_fs.jpg)
