1 / 5
Spring Spacer v2 --- Nerf MEGA Magnus
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Spring Spacer v2 --- Nerf MEGA Magnus
Spring spacer for the Nerf MEGA Magnus to get a bit more pre tension and FPS with the stock spring.
Just put it on the rear spring post like shown on the picture (the ring-shaped recess on the spacer points backwards).
Max FPS test with the weak grey trigger Magnus:
Original Nerf MEGA Darts: 70 FPS(without spacer my Magnus shoots just under 60 fps)
- UPDATE 27.7.2025 :
I made a higher spring spacer (10mm) with a cross recess for a better fit on the spring post.
----------------------------------------------------------------------
The files are already pre-oriented:
My print settings for PLA:
0,2mm layer height
5 walls
20 gyroid infill
7 top and bottom shell layers
NO supports needed