Secretlab Titan Cloud Swap Armrest for Logitech X56
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Secretlab Titan cloud swap armrest for Logitech X56 HOTAS.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I had an old HOTAS setup that screwed onto the armrest to hold itself on.
Since I just bought a very expensive gaming chair (as opposed to the $50 one I had before) I didn't want to damage the armrests.
Since the Secretlab Titan has the cloud swap technology, I searched around the internet for an armrest model that I could print. The scale was a little small so I had to do about 4-5 test prints to get it to just about the right size.
All I did was take the armrest model I found and added a baseplate that fits the Logitech X56 on it using 4 screws and nuts (per armrest). The model can be mirrored to print left or right.
Print Settings:
I didn't want to change them breaking..
infill: 20% honeycomb
wall loops: 3
top and bottom layers: 5
Links to screws and nuts used: