Secretlab Titan Cloud Swap Armrest for Logitech X56
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Secretlab Titan cloud swap armrest for Logitech X56 HOTAS.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I had an old HOTAS setup that screwed onto the armrest to hold itself on.
Since I just bought a very expensive gaming chair (as opposed to the $50 one I had before) I didn't want to damage the armrests.
Since the Secretlab Titan has the cloud swap technology, I searched around the internet for an armrest model that I could print. The scale was a little small so I had to do about 4-5 test prints to get it to just about the right size.
All I did was take the armrest model I found and added a baseplate that fits the Logitech X56 on it using 4 screws and nuts (per armrest). The model can be mirrored to print left or right.
Print Settings:
I didn't want to change them breaking..
infill: 20% honeycomb
wall loops: 3
top and bottom layers: 5
Links to screws and nuts used: