1 / 4
Vallejo/Tamiya paint holder for 36/10mm & skadis (experimental) perfboards — zdjęcie 1
1 / 4

Vallejo/Tamiya paint holder for 36/10mm & skadis (experimental) perfboards

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Paint holder for 10x10mm holes perfboard with 36mm spacing and skadis. Both tamiya and vallejo bottle size available.

Ocena
0 / 5
Polubienia
7
Pobrania
35
Wydruki
0
Wyświetlenia
305
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

Paint holders for Vallejo/Tamiya bottles. Version for perfboard with 10x10 holes and 36mm spacing and IKEA Skadis (check note below!). Printed from an orange PETG. 

IMPORTANT! I added skadis type mount based only on tech drawings i found online. I did it for those liking the design but using different pegboard, yet i cannot test it as I use another type. Therefore they're marked as experimental (your material your responsibility), so if you test it please leave a note if it's ok. STEP files are for easy modding/checking everything before print. Cheers!

Tagi