1 / 3
Cooling fan MK3.5S/MK3S+ with Delta P Extruder bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cooling fan MK3.5S/MK3S+ with Delta P Extruder bracket
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fan shroud that can be mounted onto Delta P Extruder cover.
One shroud is for extruder without sock and 1.5mm lower one is for extruder with sock. I am using dragon hotend with my mod for extruder cover but outside is the same for both.
Original Models: