1 / 4
T2 (M42x0.75) to 1.25" Telescope Spacer / Extension Tube (20, 25, 30 mm) — zdjęcie 1
1 / 4

T2 (M42x0.75) to 1.25" Telescope Spacer / Extension Tube (20, 25, 30 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a simple T2 (M42x0.75) to 1.25" extension tube designed for astrophotography setups and telescope accessories.

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The spacer allows you to increase the optical distance between T2-threaded components and 1.25" accessories. It can be useful when additional backfocus or spacing is required.

Unlike many adapters, this model does not use a set screw or compression ring. The design relies on a tight friction fit, which helps avoid scratching anodized aluminum adapters such as camera T-rings.

This makes it particularly convenient for setups like:

  • T2 camera adapters

  • Sony E / mirrorless T-rings

  • lightweight astrophotography configurations

The internal thread is M42x0.75 (T2).

Features

  • T2 (M42x0.75) internal thread

  • 1.25" telescope barrel

  • simple lightweight design

  • no set screw (scratch-free friction fit)

Typical uses

  • astrophotography spacing

  • telescope backfocus adjustment

  • camera adapter spacing

  • lightweight eyepiece extensions

Printing recommendations

  • layer height: 0.16–0.2 mm

  • material: PLA / PETG

  • print orientation: vertical (barrel down)

Threads were tested on standard T2 camera adapters.

Tagi