T2 (M42x0.75) to 1.25" Telescope Spacer / Extension Tube (20, 25, 30 mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple T2 (M42x0.75) to 1.25" extension tube designed for astrophotography setups and telescope accessories.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The spacer allows you to increase the optical distance between T2-threaded components and 1.25" accessories. It can be useful when additional backfocus or spacing is required.
Unlike many adapters, this model does not use a set screw or compression ring. The design relies on a tight friction fit, which helps avoid scratching anodized aluminum adapters such as camera T-rings.
This makes it particularly convenient for setups like:
T2 camera adapters
Sony E / mirrorless T-rings
lightweight astrophotography configurations
The internal thread is M42x0.75 (T2).
Features
T2 (M42x0.75) internal thread
1.25" telescope barrel
simple lightweight design
no set screw (scratch-free friction fit)
Typical uses
astrophotography spacing
telescope backfocus adjustment
camera adapter spacing
lightweight eyepiece extensions
Printing recommendations
layer height: 0.16–0.2 mm
material: PLA / PETG
print orientation: vertical (barrel down)
Threads were tested on standard T2 camera adapters.
