Absima 1:16 RC monster truck rim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original rims are bad designed and on the front axle they break very easily. These are sturdy and good!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a rim for the Absima RTR 1:16 monster RC truck. It works also on many other Chinese 1:16 RTR cars.
The original rim offset is too small and the inner rim hits on the steering arm. The rim is too thin and this results in that the steering arm knocks one piece away and then starts to eat the rest of the rim. This results in that the tire gets loose and falls off.
My version is made of thicker walls and also offset is bigger, so it does not come close to the steering arm. I printed some in PLA and they are working perfectly in the rough hands of my 7-year old son.
As said, the offset is a couple of mm bigger, which means that the car becomes a little bit wider.
I used the automatic support painting with default settings and the rims turned out great!