Magnetic Morse Key Mount for XIEGU VK-6 Paddle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic PLA Morse key mount. Stable CW on iron. Fits 30x10x4mm magnets & custom text. (Glue recommended!)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic Morse Key Mount (PLA)
This is a custom-designed, 3D-printed base for a Morse key, optimized for stability and comfort. By using large integrated magnets, this mount stays firmly attached to any ferrous (iron or steel) surface, preventing the key from sliding during CW operation.
Key Features:
Magnetic Base: Designed for 30x10x4mm magnets. While the magnets fit snugly into the recessed pockets, gluing them in place (e.g., with CA glue or epoxy) is highly recommended for long-term durability.
Integrated Lettering: The custom text was generated directly in the slicer, giving the mount a professional, personalized look without the need for complex CAD editing.
Material: Printed in PLA for high rigidity and a clean finish.
Recommended Print Settings
Printer: Any FDM Printer
Rafts: No
Supports: No (unless your lettering has extreme overhangs)
Layer Height: 0.2 mm
Infill: 20% (Grid or Gyroid recommended for stability)
Filament: PLA
Notes: The magnet pockets are designed for a snug fit, but a drop of CA glue (superglue) is recommended to keep the 30x10x4mm magnets secure.