Liczymy pasujące modele…
Adjustable stand for xiegu G90 with 5 available positions !!IMPORTANT!! Make sure your printer doesn't have any issues with elephant foot, because you may have some problems with teeth to get into radio radiator. Try minimalize it with…
Simple knobs for Xiegu G90 You can choose between standard version, and second one with rubber oring to improve grip, i used 22x2 oring CAD files included Print settings: Layer high: 0.2mm Infill: 20% Depending of your printer nozzle and…
Please like and follow and post your makes This is a speaker redirector for the Xiegu G90. It was designed to be held in place by the G90-H1 bracket, but tape would also work. I made the redirection cone much shorter than the original…
Intro I wanted a slimline protection frame / side rails for my Xiegu G90 but could not find any suitable ones on the internet. So I set about measuring up and creating my own. Design Principles Slimline - not take up too much space, but…
Thank you so much to inlinerbutch who made the inital stand that I remixed from! This is a fantastic stand that folds up nicely to pack up my G90 . Unfortunately there were some sharp right angle corners on the stand that happened to snap…
Protective box for Xiegu's CE-19 interface, used for the Xiegu G90 and X5105 HAM radios. Print either bottom or bottom ONLY AF-CON. The latter only has the Radio and AF-CON holes open, the other has all openings. The box is printed so…
Based on: https://www.printables.com/model/426041-xiegu-g90-adjustable-stand My Xiegu G90 came with 7 fins on the side instead of 5, so I needed thinner fingers in the stand, if you've got one like that, this stand should work for you
I needed a safety cover to be able to keep the face of my x6200 safe while carrying it in my backpack. before it was just slid into the pocket and I was afraid it would mess up the knobs or worse the screen. I decided I wanted a simple…
I wanted a speaker deflector for my G90 that was low profile enough to fit in a pack and also be the same height as my Ham Gadgets Ultra Pico Keyer, this is what I came up with. No need to take the radio apart for install, but you will…
Protective box for Xiegu's CE-19 interface, used for the Xiegu G90 and X5105 HAM radios. Print either bottom or bottom ONLY AF-CON. The latter only has the Radio and AF-CON holes open, the other has all openings. The box is printed so…
Xiegu G90 Faceplate Cover I designed this Xiegu G90 faceplate cover to protect the front knobs and buttons of my G90 while packed for traveling. It remains securely attached by snapping into the OEM side rails of the G90 and pops off…
protection for x6100 ham radio.t the last 4 files are updated. everything should line up. you will need to flip the last file. it uploaded on the wrong side. ive printed many version without supports.
Snap-on protective side panels for QRP Ham radio Xiegu x6100. Very accurate model. No supports needed. You just need to slightly abrade surface of the holes and pins where is meets the hole. Then push the 8 pins into the holes, no need to…
Requires a BNC angle connector!
This is a protective cover for the front of the Xiegu G90 that utilizes the H2 accessory (different front rails than stock). It is designed to slide from the top down and to protect the screen, knobs, and top buttons from things falling…
This bracket allows you to mount a DE19 interface to the top rear of a Xiegu G90. You will have to replace 4 of the original M3 screws with M3x8 screws. You'll need to print two brackets one will need to be mirrored in your slicer. I…
I liked the dome shape of DL9HAM's Xiegu G90 speaker redirector, and the elegance that it did not need supports to print, but I wanted something less permanent that could be put on/removed easily. Inspired by this clip-on stand, I used a…
Desktop stand for Xiegu X6100 with a 6010 12v cooling fan mounted behind and cooling channels behind the radio. This remix idea from on2on and jeff_j3ffr3y. STEP and STL are modeled at 1000% due to an error in original STL import before…
Simple adjustable distance bar for Xiegu G90 with 5 available positions - perfect for stack 2 radios on themselfs !!IMPORTANT!! Make sure your printer doesn't have any issues with elephant foot, because you may have some problems with…
Introducing the Xiegu G90 Speaker Redirector, now travel-sized for your convenience! This pint-sized prodigy was designed to hug the G90-H1 bracket like a koala on a eucalyptus tree, but if you're out of brackets, slap some tape on there…
I havent seen many manpacks for the G90 so why not make my own.
Redirects the sound coming out of a G90 towards the operator.
This case was designed to mount the radio to a molle panel and still allow access to the controls. Sides left open to allow removal of the radio without removing connections.
I wanted to replace the Xiegu factory power connector with powerpole. I took inspiration from one I saw on a FT817. The first one I made does not require the radio to be opened. Just put a powerpole connector on the end of the factory…
This is a basic base plate to start making a mount for the front of your Xiegu G90. It fits inside the front. You can make your own way to mount this base plate
Print all the pieces face-down on the print bed and then glue the knob covers to the main unit with super glue gel or your adhesive of choice.
There are a few models of feet for the Xiegu G90, but all of them lift just the front of the radio. I'm keeping the radio horizontal, but wanted to lift it ~5 mm from the shelf in order to have better cooling. Print the feet laying on one…
This clip-on microphone hook attaches to the radio's built-in cooling fins so that you can easily put it on and take it off without screws or adhesives. The hook is high enough that it will hold the microphone securely even if the radio…
I wanted a compact, but sturdy case to throw in my backpack when bringing the Xeigu X6200 on POTA activations. This is remixed from the incredible Rugged Box by Whity . I printed the box and latches in PETG, and the inserts are TPU.…
stand for Xiegu G90 Faceplate print right and left. press on to back of faceplate and then connect cable to hold them in place.
Printed with a 5% infill. The products I used: Affiliate Links used when possible: Where I bought my X6200, you get $15 bucks off: https://radioddity.refr.cc/default/u/danielbrooks X6200: https://amzn.to/4cza4sQ Pelican case 1200:…
Xiegu X6100 Chassis Bottom Plate Remixed for 1/4x20 Threaded Insert for use on tripods and other 1/4x20 threaded accessories. I had to modify my threaded inserts by cutting to length with diamond cutoff wheel in a rotary tool. Affiliate…
Simple xiegu g90 side mount for your future projects !!IMPORTANT!! Make sure your printer doesn't have any issues with elephant foot, because you may have some problems with teeth to get into radio radiator. Try minimalize it with printer…
Xiegu G90 Vehicle Mount Sleeve for Wide Bracket snaps and screws onto the body of G90 radio using the finned sides of the body to tightly mount the radio. The bracket can then be installed into a typical CB Radio Wide Bracket (full-size…
simple and easy to print!
Small insert for an amazon tool pouch for the Xiegu X6200 Radio. Theres an attached pdf with instructions. If you want it done exactly like pictured, you will need the following. At the moment of posting this, i assembled and tested for…
The brackets replace the original metal brackets.
Protects the back (antenna jack, power jack) of a Xiegu G90 amateur radio transceiver.
Xiegu X5105 holder for field use or portable use, protects the radio and provides two stable handles to hold the radio. Connect the two parts with two M4x10/20 screw.
This is a face cover to protect the knobs and buttons on the front of your radio when it's packed in a bag or case. This cover only works with the front loops removed (simply unscrew 2 screws on either side, remove the loop, then replace…
I like the look of HamRadioDudes G-106 side rails over the ones that I had originally designed, but felt they needed some tweaks. These rails are harder to print than mine, I recommend using tree supports and print them in the orientation…
This design fits a 7Ah/8Ah SLA/LFP battery in the base. Space for the DE-19 digital interface, or the smaller digirig too, alongside plenty of space for cable management. Please do use the STEP file to make sure your battery, 9pin cable,…
I took IU1OPK's design for the FT891, shrunk some things, cut a few things, did some stuff, and now there is a rail for the Xiegu G106. The holes on this are a tad off, to fix this, i slightly drilled the hole a little wider. In the…
This is my G90 sound reflector. There are many like it, but this one is mine. And, of course, it can be yours as well. This reflector differs from others in a few important ways. Rather than optimizing primarily for printability, it…
This is a model I printed for my Xiegu X6100. This is not my model, I am uploading it from thingiverse. https://www.thingiverse.com/thing:6215606/files
Fast fix to stack the two radios, using the Xiegu G90 oficial Fan Mount System as base, and be easy dismounted. That part needs the Xeigu G90 Fan mount and the mounting bracket that comes with the FTM-300DR to work. And need to be screwed…
Due to a lack of desk space, I decided to store my HF radio on a vertical wall under the countertop where I operate. My design requirements also specified that the radio must be easy to disconnect and take with me for POTA operations.…
Magnetic Morse Key Mount (PLA) This is a custom-designed, 3D-printed base for a Morse key, optimized for stability and comfort. By using large integrated magnets, this mount stays firmly attached to any ferrous (iron or steel) surface,…
The Xiegu G106 is a great minimalist QRP radio, but it lacks a tilt stand. This remedies this and even allows you to use the rubber feet that came with the radio! I recommend you print these in PETG or ASA. To assemble, you will need four…
Dust cover for xiegu vk-6 iambic paddle Print Vase Mode, Layer height 0.24, two bottom layers, ABS/PETG/PLA is ok (mine in abs), print time was about 30 minutes. FreeCAD model attached, second Body for full “bullet-proof” cover (case?).
Dust cover for a Xiegu VK-6 Morse key. Fits perfectly. Easy to print.
Created new knobs for Xiegu G106. Original knobs are made from solid aluminum. Printing new knobs saved around 2.4 oz on total weight. Flip foot is not my design. can be found here. https://www.thingiverse.com/thing:6635763 Youtube video…
Overview Three friction-fit front covers for the Xiegu G7250 detachable control head. Screen Only protects the 7-inch touchscreen and speaker grille and leaves every control usable. Full Face closes over the entire front, knobs included.…
I took the front loops off of my Xiegu G90 to make it fit better in my backpack. But then I found that those loops helped keep the radio from sliding off the Clip-on Stand that I like to use. Without them the radio could too easily slide…
The Xiegu G90 is a popular portable HF Transceiver. Unfortunately, it uses an SO-239 Connector for the Antenna port, which some of us operators (especially the QRP enthusiasts) don't like. I personally prefer to use BNC for anything that…
I wanted a G106 stand for my desk that looked sleek and didn't require any screws or tape to attach. It was also designed not to require supports. The ‘foot' has space for you to deboss a callsign with your slicer software if you want.…
I liked the dome shape of DL9HAM's Xiegu G90 speaker redirector, and the elegance that it did not need supports to print, but I wanted something less permanent that could be put on/removed easily. Inspired by this clip-on stand, I used a…
This clip-on microphone hook attaches to the radio's built-in cooling fins so that you can easily put it on and take it off without screws or adhesives. The hook is high enough that it will hold the microphone securely even if the radio…
Due to a lack of desk space, I decided to store my HF radio on a vertical wall under the countertop where I operate. My design requirements also specified that the radio must be easy to disconnect and take with me for POTA operations.…
This bracket allows you to mount a DE19 interface to the top rear of a Xiegu G90. You will have to replace 4 of the original M3 screws with M3x8 screws. You'll need to print two brackets one will need to be mirrored in your slicer. I…
Magnetic Morse Key Mount (PLA) This is a custom-designed, 3D-printed base for a Morse key, optimized for stability and comfort. By using large integrated magnets, this mount stays firmly attached to any ferrous (iron or steel) surface,…
This is a face cover to protect the knobs and buttons on the front of your radio when it's packed in a bag or case. This cover only works with the front loops removed (simply unscrew 2 screws on either side, remove the loop, then replace…
This design fits a 7Ah/8Ah SLA/LFP battery in the base. Space for the DE-19 digital interface, or the smaller digirig too, alongside plenty of space for cable management. Please do use the STEP file to make sure your battery, 9pin cable,…
A mobile mount for the g90. You will need a universal radio mount bracket and 4 1/4x20 or equivalent threaded inserts with 1/4 x 20 x 1/2" screws to mount. I printed this with 40% infill using tree supports and it should print fine with…
I took the front loops off of my Xiegu G90 to make it fit better in my backpack. But then I found that those loops helped keep the radio from sliding off the Clip-on Stand that I like to use. Without them the radio could too easily slide…
Side frame pieces for the Xiegu G106. To install, remove the existing 3x6mm screws and replace with 3x10mm. The stand props up the radio for easier viewing. One piece version, shown on the radio and 3 piece version, shown in front of the…
no supports, no infill, 2-3 walls, 0.4mm nozzle 5x M2x6 screws speaker (optional): dia=30mm standard headphone speaker FreeCad project file GitHub: front-panel-bracket.FCStd
A Front and Back cover for a Xiegu G106 Radio. Use elastic cord to hold front and backside. The Front cover allows to install this kick stand stand: https://www.thingiverse.com/thing:6635763 Printed in PETG
I wanted a G106 stand for my desk that looked sleek and didn't require any screws or tape to attach. It was also designed not to require supports. The ‘foot' has space for you to deboss a callsign with your slicer software if you want.…
This will likely void your warranty. I take no responsibility for this messing up your equipment or causing issues. Do this at your own risk. I'm not a huge fan of Power Pole connectors. They're nice but I find them rather large for what…
In my ongoing effort to Ryobi the world , this is an electronics enclosure designed to combine a Ryobi battery adapter with a 13.8V step-down converter. It provides a clean, compact way to power projects directly from Ryobi batteries.…
This is a model designed for mounting a Xiegu G90 head unit using standard action cam (Go pro Style) mounting arms and mounting hardware. I printed it out of PETG at 100% Infill for use in my car. I used small screws to screw into the…
Print in TPU, set walls to 10 for a solid print. Fit can be adjusted with flow rate or by uniform scaling the item up or down in the slicer by a small amount (<1%). It should be pretty close on a well calibrated printer.
A mobile mount for the g90. You will need a universal radio mount bracket and 4 1/4x20 or equivalent threaded inserts with 1/4 x 20 x 1/2" screws to mount. I printed this with 40% infill using tree supports and it should print fine with…
Update July 2026 I have updated the rear stand so that now instead of resting at the back edge of the radio with the radio's feet keeping it in place it has holes in it so that it can go directly over top of the feet. The height and angle…
This Xiegu G1M Tuning Knob is a smaller remix of user maartenva's Xiegu X108G tuning knob: https://www.thingiverse.com/thing:1750386 This spinner tuning knob fits the roughly 19mm knob of this radio and utilizes a ziptie for mounting.…
