Prusament Refill Adapter for old style Prusament Spool (replaces the Cardboard center)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to use new prusament refills on old prusa spools that came with the cardboard roll in the middle.
- Ocena
- 4,75 / 5
- Polubienia
- 52
- Pobrania
- 194
- Wydruki
- 14
- Wyświetlenia
- 858
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1
*I added .step, .3mf and .f3d files*
I ordered a PLA Galaxy Black refill and didn't know it was a for a new spool until it arrived in the mail.
To make it fit, i drew this adapter for the old style Prusament spool to take the new refill.
Diameter and wideness is according to the refill i got.
Diameter 101mm and 55mm wide.
Just Print and then replace the cardboard tube.
i would do a test print of a slice of the model to see if is too snug or loose.
i think the spool wont come apart by itself, but i have not testet it printing many hours or days at once.
You can pull it apart again for more usages.
If you want to be sure that it doesn’t come apart you can hold the spool halves together with nuts and bolts (like in the Prusa manual) or with cable ties through the center of the spool.
In the pictures you can see how i added cable ties.
I put them through some of the hex holes in the spool center and put cable tie heads on the other side. I tightened them by hand and then pulled them tighter just one "tooth" more using small pliers, so that there is a slightly bit of tension.
I printed it in PETg
i hope it helps someone^
happy extruding <3
PS: i am happy, so many of you like it !