Recycling retrofit rings: separate your garbage into trash and recycling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hang trash and recycling bags from your built-in garbage can!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
One of the most annoying parts about recycling is figuring out where to put it. Many homes have a single in-cabinet trash can, leaving you with no easy way to separate the recycling without cluttering your kitchen.
These dual rings are designed to sit in-place of a lid, allowing you to hang both a trash and a recycling bag in a single bin. They're a perfect match for the simplehuman 20L size D bags.
They're designed to fit in a rounded rectangular trash can with outer dimensions of 14 ¾" x 9 ⅜" (375mm x 240mm) with a corner radius of 1" (25mm) and a lip of ⅜" (9mm). They make the can 3" (75mm) taller.
Pictured inside a 35L can by Sige.
These were printed in PLA with no supports on a Prusa MK4S. Both the rings and the divider were printed upside down.
Note: This is not an official Google product.