1 / 2
Low Voltage Alarm Box. HXYP RN01 heltec 12v 5v 24v power station lfp lifepo4 battery batteries cell
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple box for your low voltage alarm. perfect for LFP batteries or other uses.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Box for Low Voltage Alarm.
need 4screws, or you can just glue the board inside. the lid is press-fit, could be glued too if needed.
my main use for this is DIY LiFePo4 power stations. its hard to know when the power will cut out if you dont have an expensive coulomb meter. with this you can at least get a warning so as to not hit the BMS cut-off.