Lanard Shot Gun / Air Zone Triple Shot / Huntsman Pillager X12 Picatinny Pump Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement pump grip for the Triple Shot.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement pump grip for the Triple Shot with added picatinny rails for extra customisation and/or to replace the original part which has a tendency to break where it attaches to the priming bar. The picatinny dimensions are based off the NATO metric measurements.
The design is designed to have two M3 screws used to add rigidity to the posts that fit in the priming bar holes. Refer to the picture when installing the heat inserts (M3x4x5mm heat inserts are shown). 25mm to 30mm length M3 screws are used.
A STEP file has also been included for easier remixing and alteration of the design.
Printing with a standard printing profile such as 20% infill using a 0.4mm nozzle should work.