1 / 5
Lanard Shot Gun / Air Zone Triple Shot / Huntsman Pillager X12 Picatinny Pump Grip — image 1
1 / 5

Lanard Shot Gun / Air Zone Triple Shot / Huntsman Pillager X12 Picatinny Pump Grip

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement pump grip for the Triple Shot.

Rating
0 / 5
Likes
2
Downloads
11
Makes
0
Views
112
Reviews
0

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial — Share Alike

Replacement pump grip for the Triple Shot with added picatinny rails for extra customisation and/or to replace the original part which has a tendency to break where it attaches to the priming bar. The picatinny dimensions are based off the NATO metric measurements.

The design is designed to have two M3 screws used to add rigidity to the posts that fit in the priming bar holes. Refer to the picture when installing the heat inserts (M3x4x5mm heat inserts are shown). 25mm to 30mm length M3 screws are used.

A STEP file has also been included for easier remixing and alteration of the design.

Printing with a standard printing profile such as 20% infill using a 0.4mm nozzle should work.

Tags