Metric (M5) P-Lok Printable Molle Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
P-Lok but sized for M5 nuts
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
General Info
P-Lok but remixed for M5 hardware/M5 nuts that are 8mm across face-to-face.
Still uses 1x m3x20mm bolt per clip
Check out the original model for more info, like print settings, etc.
Personal notes:
The screw holes on the half that has clips can be weak. I had a few failures while trying to insert my screws, so I resorted to boring out the hole with a 3mm drill bit so that screwing the M3 screw wouldn't break it. See the picture below.
Print in PLA or PETG. DO NOT print in TPU; even if it's really stiff like 68D, it will be too flexible and has a chance of separating.
Changelog:
7/2/26 - Added Poppy's logo back in respect to their wishes and all the hard work they put into the design.