Metric (M5) P-Lok Printable Molle Clips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
P-Lok but sized for M5 nuts
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 53
- Makes
- 0
- Views
- 234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
General Info
P-Lok but remixed for M5 hardware/M5 nuts that are 8mm across face-to-face.
Still uses 1x m3x20mm bolt per clip
Check out the original model for more info, like print settings, etc.
Personal notes:
The screw holes on the half that has clips can be weak. I had a few failures while trying to insert my screws, so I resorted to boring out the hole with a 3mm drill bit so that screwing the M3 screw wouldn't break it. See the picture below.
Print in PLA or PETG. DO NOT print in TPU; even if it's really stiff like 68D, it will be too flexible and has a chance of separating.
Changelog:
7/2/26 - Added Poppy's logo back in respect to their wishes and all the hard work they put into the design.