1 / 5
Pedestrian tunnel with exits to platform H0 1:87 — zdjęcie 1
1 / 5

Pedestrian tunnel with exits to platform H0 1:87

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modular model for an entry of a station towards the platform(s) that are on a slope where the trains run.

Ocena
0 / 5
Polubienia
6
Pobrania
38
Wydruki
0
Wyświetlenia
195
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a tunnel that will make an entrance towards a station/platform that'll be on a slope/dyke. It's a modular system so one can configure it to their liking. 

How does it work:

  • Entrances have a rim in which a female side of tunnel straight section fits (tight fit).

  • Tunnel straight sections have a male (small 1mm rim) and female side (no rim).

  • Exits to platforms have only female sides (no rims).

  • To join two female sides there is an 'inverter' part included.

  • To join two male sides, there is a 'centrepiece' part included.

My configuration is the entrance with date and NS logo connected to a 5cm straight section that ends up in a single platform exit that I use to the right side. The tunnel is closed with the end plate to create a dead-end with only an exit to a platform.

Printer setting:

  • I printed the tunnel with PLA with a 0.4mm nozzle.

  • By printing the straights, centrepiece and inverter on the female side there is no need for support.

  • Entrances are printed with the outside facing side on the bed. Again no need for support.

  • Exits are printed on the back, so on their roof with the wall up. Again, no support.

Example configurations:

Not all possible configurations are tested off course, but the main parts are tested and they fit well. Examples are:

  • A straight through tunnel (entrance - straight - centrepiece - straight - entrance)

  • Straight through with exits (entrance - straight - exit - straight - entrance)

  • Two exits to two platforms (entrance - straight - exit - straight - inverter - straight (optional) - exit - straight - entrance)

  • Tunnel with dead-end at exit as I use it (entrance - straight - exit - end plate)

Entrances available:

There are four different versions of the entrances. For personal reasons I created an entrance with date and logo. As I'm creating a Dutch landscape it's the NS logo that I use. The date/year is 1968, the year my father bought his first Märklin set that started all this interest in H0 model trains.

  • With year and NS logo,

  • With year only,

  • With NS logo only,

  • Clean with no year or logo.

NOTE: Let me know if you made your own configuration. Pictures are welcome!

Tagi