Pedestrian tunnel with exits to platform H0 1:87
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular model for an entry of a station towards the platform(s) that are on a slope where the trains run.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a tunnel that will make an entrance towards a station/platform that'll be on a slope/dyke. It's a modular system so one can configure it to their liking.
How does it work:
Entrances have a rim in which a female side of tunnel straight section fits (tight fit).
Tunnel straight sections have a male (small 1mm rim) and female side (no rim).
Exits to platforms have only female sides (no rims).
To join two female sides there is an 'inverter' part included.
To join two male sides, there is a 'centrepiece' part included.
My configuration is the entrance with date and NS logo connected to a 5cm straight section that ends up in a single platform exit that I use to the right side. The tunnel is closed with the end plate to create a dead-end with only an exit to a platform.
Printer setting:
I printed the tunnel with PLA with a 0.4mm nozzle.
By printing the straights, centrepiece and inverter on the female side there is no need for support.
Entrances are printed with the outside facing side on the bed. Again no need for support.
Exits are printed on the back, so on their roof with the wall up. Again, no support.
Example configurations:
Not all possible configurations are tested off course, but the main parts are tested and they fit well. Examples are:
A straight through tunnel (entrance - straight - centrepiece - straight - entrance)
Straight through with exits (entrance - straight - exit - straight - entrance)
Two exits to two platforms (entrance - straight - exit - straight - inverter - straight (optional) - exit - straight - entrance)
Tunnel with dead-end at exit as I use it (entrance - straight - exit - end plate)
Entrances available:
There are four different versions of the entrances. For personal reasons I created an entrance with date and logo. As I'm creating a Dutch landscape it's the NS logo that I use. The date/year is 1968, the year my father bought his first Märklin set that started all this interest in H0 model trains.
With year and NS logo,
With year only,
With NS logo only,
Clean with no year or logo.
NOTE: Let me know if you made your own configuration. Pictures are welcome!