MBUS 2 front sight detent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement detent for the front sight
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an inexact replacement for a Magpul MBUS 2 front sight that I made after I broke mine. I printed it with a 0.2mm nozzle. Do whatever settings you need to use, I did 2 walls, no supports necessary, orient the flat side onto the bed. I actually printed this again, scaling it up at 101% and it was a bit closer to the correct size; I think the actual correct fit is somewhere between 100 and 101%, or I need to modify some details of the detent. Let me know if you figure it out!
One of my first modelling jobs, I'm learning on the fly, and it was very satisfying!