Pottery Wheel Bat System - Shimpo Whisper T
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes thrown pot easily removed from the wheelhead without touching the pot itself. Ø300mm, C-C 245-265mm.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 586
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Simple bat system for the Shimpo Whisper T, but fits other wheels that uses M6 screws and C-C of 245-265mm since one holes is slotted. Rounded edges to avoid any scratched hands. Opening for finger accessibility and easy removal of bat.
Assembly:
Fits M6 socket head cap screws (Ø10mm heads) by simply pressing the Base over the screws. There is also a version added where the Base is screwed (Ø7mm holes) instead, however note that screw heads will then be sticking out 2mm.
Printing instructions:
Supplied STL files are orientated in the best way to be printed.
Material | PLA or PETG |
|---|---|
Nozzle Diameter | 0.4mm |
Layer Height | 0.2mm |
Perimeter / Wall Count | 2 or more |
Infill Type | Any |
Infill Percentage | > 15% |
Support | None |