Pottery Wheel Bat System - Shimpo Whisper T
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makes thrown pot easily removed from the wheelhead without touching the pot itself. Ø300mm, C-C 245-265mm.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 72
- Makes
- 0
- Views
- 586
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Simple bat system for the Shimpo Whisper T, but fits other wheels that uses M6 screws and C-C of 245-265mm since one holes is slotted. Rounded edges to avoid any scratched hands. Opening for finger accessibility and easy removal of bat.
Assembly:
Fits M6 socket head cap screws (Ø10mm heads) by simply pressing the Base over the screws. There is also a version added where the Base is screwed (Ø7mm holes) instead, however note that screw heads will then be sticking out 2mm.
Printing instructions:
Supplied STL files are orientated in the best way to be printed.
Material | PLA or PETG |
|---|---|
Nozzle Diameter | 0.4mm |
Layer Height | 0.2mm |
Perimeter / Wall Count | 2 or more |
Infill Type | Any |
Infill Percentage | > 15% |
Support | None |