Dayton Audio B452 / B452-AIR Replacement Speaker Grille
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
2,45 € – 2,99 € netto (bez VAT)
Dla pliku: Dayton Audio 6mm Speaker Grille Pinv2_0.4n_0.2mm_PETG_COREONE_1h53m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,72 € netto (środek widełek).
- Masa podana przez autora
- 55 g
- Czas druku podany przez autora
- 1,89 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Replacement speaker grille modeled after the OEM grille made of MDF. I also re-modeled the plastic pins.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dayton audio's incredibly popular B452 series speakers no longer offer replacement speaker grilles. The OEM grilles were made of a thin 6mm MDF and I recently had one break at the thinnest point.
I took the unbroken grille off of the other speaker and modeled it in Fusion from the original parts to print a replacement grille and the plastic attachment pins that insert into the enclosure's rubberized grommet.
The standard pins fit perfectly in my speakers but given manufacturing tolerances of these fantasic $45 speakers could mean that your enclosure hole alignment is slightly off - I am including a model of offset pins as well, which allow you to rotate the pins for precise alignment.
I've printed at both 100% infill for the original prototype and the final print is default 15% rectilinear infill on the 0.20mm Structural profile. I ended up printing the pins on my SLA printer but they will work via FDM as well.
After printing, I used contact cement from my local big box retailer to glue the perimiter of the speaker fabric I had on-hand.
The serrated end of the pin inserts into the printed grille, and the smooth end of the pin is what inserts into the speaker enclosure.
Original product manuals:
B452-AIR User Manual.indd
B452 User Manual.indd