1 / 6
Dayton Audio B452 / B452-AIR Replacement Speaker Grille — image 1
1 / 6

Dayton Audio B452 / B452-AIR Replacement Speaker Grille

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement speaker grille modeled after the OEM grille made of MDF. I also re-modeled the plastic pins.

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
73
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial — Share Alike

Dayton audio's incredibly popular B452 series speakers no longer offer replacement speaker grilles. The OEM grilles were made of a thin 6mm MDF and I recently had one break at the thinnest point. 

I took the unbroken grille off of the other speaker and modeled it in Fusion from the original parts to print a replacement grille and the plastic attachment pins that insert into the enclosure's rubberized grommet.

The standard pins fit perfectly in my speakers but given manufacturing tolerances of these fantasic $45 speakers could mean that your enclosure hole alignment is slightly off - I am including a model of offset pins as well, which allow you to rotate the pins for precise alignment.

I've printed at both 100% infill for the original prototype and the final print is default 15% rectilinear infill on the 0.20mm Structural profile. I ended up printing the pins on my SLA printer but they will work via FDM as well. 

After printing, I used contact cement from my local big box retailer to glue the perimiter of the speaker fabric I had on-hand. 

The serrated end of the pin inserts into the printed grille, and the smooth end of the pin is what inserts into the speaker enclosure.

Original product manuals:
B452-AIR User Manual.indd
B452 User Manual.indd

Tags