QidiBox Spool drive UPGRADE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redid the spool drive gear to use a bigger one way bearing that doesn't MAKE NOISE and as better free spin motion.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 124
- Wydruki
- 2
- Wyświetlenia
- 1386
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
QidiBox drive gear replacement assy
Print with PETG-GF or better (heat resistance ***IMPORTANT***)
Tolerances are very small in order to make assembly solid on the shaft and bearing.
This is a complete assembly, you will need to salvage the stainless pin and small end bearings only.
Watch my other SHORT video (doesn't work in here :( ) for a better visual on how it works
Print setup:
Filament: PETG-GF or higher Temp grade
Layer height: 0.12
Walls: 4
Infill: 25%
SLOW PRINTING recommended for better quality
BOM:
4X One way bearing 8mm X 14mm X 12mm
Heavy Duty Anti Slip Tape , to add on drum rollers for better grip (highly suggest putting a layer of contact cement glue before sticking the anti-slip tape pieces)
If you like my work, thank you for supporting me :)
