QidiBox Spool drive UPGRADE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Redid the spool drive gear to use a bigger one way bearing that doesn't MAKE NOISE and as better free spin motion.
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 124
- Makes
- 2
- Views
- 1,386
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
QidiBox drive gear replacement assy
Print with PETG-GF or better (heat resistance ***IMPORTANT***)
Tolerances are very small in order to make assembly solid on the shaft and bearing.
This is a complete assembly, you will need to salvage the stainless pin and small end bearings only.
Watch my other SHORT video (doesn't work in here :( ) for a better visual on how it works
Print setup:
Filament: PETG-GF or higher Temp grade
Layer height: 0.12
Walls: 4
Infill: 25%
SLOW PRINTING recommended for better quality
BOM:
4X One way bearing 8mm X 14mm X 12mm
Heavy Duty Anti Slip Tape , to add on drum rollers for better grip (highly suggest putting a layer of contact cement glue before sticking the anti-slip tape pieces)
If you like my work, thank you for supporting me :)
