Right Size Rope On Demand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to get exact lengths of rope repeatedly.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
If you're into braiding/knot tying you've run into the chore of quartering 100' of rope. Before now, you'd have to spool it out across multiple rooms in your house and then painstakingly double it over and cut it and HOPE that measuring twice saying wasn't as important as they say it is.
Now you can just bolt this to your crafting area, feed 4mm paracord up to 1/2" rope through the hold in the back, press a button, and you're off to the races with exactly 24.5' of rope, or 16' or 12' or whatever!
There is some hardware you'll need...here's what I used:
Controller board
FYSETC Spider V1.1
Stepper motors (NEMA 17 used here which are 42mm wide)
Raspberry Pi
AT LEAST 24V, 2.15A power supply for the Spider.
You'll have to update your Printer.cfg
[printer]
kinematics: none
max_velocity: 200
max_accel: 200
[manual_stepper rope_feed_bottom]
step_pin: PE11
dir_pin: PE10
enable_pin: !PE9
microsteps: 16
full_steps_per_rotation: 200
rotation_distance: 117.28
velocity: 100
accel: 50
[tmc2209 manual_stepper rope_feed_bottom]
uart_pin: PE7
run_current: 0.45
hold_current: 0.20
sense_resistor: 0.110
stealthchop_threshold: 999999
[manual_stepper rope_feed_top]
step_pin: PD8
dir_pin: PB12
enable_pin: !PD9
microsteps: 16
full_steps_per_rotation: 200
rotation_distance: 117.28
velocity: 100
accel: 50
[tmc2209 manual_stepper rope_feed_top]
uart_pin: PE15
run_current: 0.45
hold_current: 0.20
sense_resistor: 0.110
stealthchop_threshold: 999999[printer]
kinematics: none
max_velocity: 200
max_accel: 200
[manual_stepper rope_feed_bottom]
step_pin: PE11
dir_pin: PE10
enable_pin: !PE9
microsteps: 16
full_steps_per_rotation: 200
rotation_distance: 117.28
velocity: 100
accel: 50
[tmc2209 manual_stepper rope_feed_bottom]
uart_pin: PE7
run_current: 0.45
hold_current: 0.20
sense_resistor: 0.110
stealthchop_threshold: 999999
[manual_stepper rope_feed_top]
step_pin: PD8
dir_pin: PB12
enable_pin: !PD9
microsteps: 16
full_steps_per_rotation: 200
rotation_distance: 117.28
velocity: 100
accel: 50
[tmc2209 manual_stepper rope_feed_top]
uart_pin: PE15
run_current: 0.45
hold_current: 0.20
sense_resistor: 0.110
stealthchop_threshold: 999999