1 / 1
Right Size Rope On Demand — image 1

Right Size Rope On Demand

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Used to get exact lengths of rope repeatedly.

Rating
0 / 5
Likes
3
Downloads
5
Makes
0
Views
181
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

If you're into braiding/knot tying you've run into the chore of quartering 100' of rope. Before now, you'd have to spool it out across multiple rooms in your house and then painstakingly double it over and cut it and HOPE that measuring twice saying wasn't as important as they say it is. 

Now you can just bolt this to your crafting area, feed 4mm paracord up to 1/2" rope through the hold in the back, press a button, and you're off to the races with exactly 24.5' of rope, or 16' or 12' or whatever! 

There is some hardware you'll need...here's what I used:

Controller board
FYSETC Spider V1.1

Stepper motors (NEMA 17 used here which are 42mm wide)

Raspberry Pi

AT LEAST 24V, 2.15A power supply for the Spider. 

You'll have to update your Printer.cfg
[printer]

kinematics: none

max_velocity: 200

max_accel: 200

[manual_stepper rope_feed_bottom]

step_pin: PE11

dir_pin: PE10

enable_pin: !PE9

microsteps: 16

full_steps_per_rotation: 200

rotation_distance: 117.28

velocity: 100

accel: 50

[tmc2209 manual_stepper rope_feed_bottom]

uart_pin: PE7

run_current: 0.45

hold_current: 0.20

sense_resistor: 0.110

stealthchop_threshold: 999999

[manual_stepper rope_feed_top]

step_pin: PD8

dir_pin: PB12

enable_pin: !PD9

microsteps: 16

full_steps_per_rotation: 200

rotation_distance: 117.28

velocity: 100

accel: 50

[tmc2209 manual_stepper rope_feed_top]

uart_pin: PE15

run_current: 0.45

hold_current: 0.20

sense_resistor: 0.110

stealthchop_threshold: 999999[printer]

kinematics: none

max_velocity: 200

max_accel: 200

[manual_stepper rope_feed_bottom]

step_pin: PE11

dir_pin: PE10

enable_pin: !PE9

microsteps: 16

full_steps_per_rotation: 200

rotation_distance: 117.28

velocity: 100

accel: 50

[tmc2209 manual_stepper rope_feed_bottom]

uart_pin: PE7

run_current: 0.45

hold_current: 0.20

sense_resistor: 0.110

stealthchop_threshold: 999999

[manual_stepper rope_feed_top]

step_pin: PD8

dir_pin: PB12

enable_pin: !PD9

microsteps: 16

full_steps_per_rotation: 200

rotation_distance: 117.28

velocity: 100

accel: 50

[tmc2209 manual_stepper rope_feed_top]

uart_pin: PE15

run_current: 0.45

hold_current: 0.20

sense_resistor: 0.110

stealthchop_threshold: 999999

Tags