mini-sized Spectrum refill spool (180x180)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool endcaps for Spectrum and TheFilament refill cores, can be printed on 180 x 180mm Printers.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
The official Spectrum design is too large to be printed on machines like the Prusa Mini or Bambu Mini, so I decided to make a version that fit those printers.
Note: The IRL pictures show an earlier prototype, because I havent come around to print the finished model myself yet. The current design is as shown in the CAD screenshot.
Print settings: Use Gyroid Infill to reduce warping. No other special settings are required.
Please print the spool in a Material that can withstand the heat of your Filament Dryer!
I reccomend the use of a filament clip to hold the filament in place, as the retainer holes in the endcaps are covered when the spool is still full.