mini-sized Spectrum refill spool (180x180)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool endcaps for Spectrum and TheFilament refill cores, can be printed on 180 x 180mm Printers.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
The official Spectrum design is too large to be printed on machines like the Prusa Mini or Bambu Mini, so I decided to make a version that fit those printers.
Note: The IRL pictures show an earlier prototype, because I havent come around to print the finished model myself yet. The current design is as shown in the CAD screenshot.
Print settings: Use Gyroid Infill to reduce warping. No other special settings are required.
Please print the spool in a Material that can withstand the heat of your Filament Dryer!
I reccomend the use of a filament clip to hold the filament in place, as the retainer holes in the endcaps are covered when the spool is still full.