Rotom Phone Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A phone case modeled after the Pokemon Rotom
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A case modeled after the phone form of the Pokémon Rotom. PLEASE NOTE that the size of the print is intended to be used for a phone with a rubber or tpu case already on! If you wish to use just the case itself simply scale down the models by around 5% but you may need to adjust from there.
The case is meant to be printed with the face side touching the plate at .16mm with 20% infill with auto supports and a brim
The face is meant to be inserted into the case after printing! I used super glue for mine
The face is printed at .16mm with 20% infill with a brim
I used generic PLA for mine but feel free to use whatever material you wish
P.S. the print example in the photo was painted with black and teal paint as I don't have those colors.