Rotom Phone Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A phone case modeled after the Pokemon Rotom
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 43
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A case modeled after the phone form of the Pokémon Rotom. PLEASE NOTE that the size of the print is intended to be used for a phone with a rubber or tpu case already on! If you wish to use just the case itself simply scale down the models by around 5% but you may need to adjust from there.
The case is meant to be printed with the face side touching the plate at .16mm with 20% infill with auto supports and a brim
The face is meant to be inserted into the case after printing! I used super glue for mine
The face is printed at .16mm with 20% infill with a brim
I used generic PLA for mine but feel free to use whatever material you wish
P.S. the print example in the photo was painted with black and teal paint as I don't have those colors.