M3-Mounted Large Cable Organiser for HSW (Inc. STEP/Fusion 360 files)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach your cable organiser to your HSW, now with M3 screws for easier printing, application and removal.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a disdain for the hexagonal inserts used in most HSW attachments, so this one attaches with M3 screws to M3-nut inserts in the HSW.
The only part that differs from the original model is the part that attaches to the wall. I printed this out of PETG, 3 walls, 15% gyroid infill, 0,25mm layer height. No supports are needed. Print this part in the orientation shown below (it's the orientation it has in the files).
There two screw holes, I used M3x10 screws (socket-head cap), the part has a counterbore for the cap to hide inside. There are wider holes in line of sight from the screw holes so you can fit your screwdriver in.
This part is designed to attach either horizontally or in a slanted direction as shown below (3-fold rotational symmetry in total). This means that you can align this part along the three directions indicated in black below:
Here is the one I chose
